开云体育

Think I have another N-in-B IC-7000. Will check. What's it worth to you, sir? Craig WA6OXK ________________________________ Sent: Sunday, April 2, 2023 11:29 To: [email protected]

Chip I have a new-in-box IC-7000.? You can have it for what I paid, but I have to dig and find the invoice from DxEngineering. Craig WA6OXK

Would you want to sell it to a guy who likes to work on blown up radios?

My IC-7000, installed on my boat, has died in a direct lightning strike. I would like to replace it with another, in anyone has one to sell. Thanks Chip AE5KA

I have found that even the cheapest Baofung (sp?) programming cable will work for the IC-7000 TTL logic rs-232. Buy one that says it will work with WIn 10 and cut the connectors off and take the two

If your cable is trying to use a Prolific system driver, that is probably the problem. There were so many Chinese clones of the Prolific chip set, that they rewrote their drivers to not work with

?Thanks for the replies.I have had a RT systems disc loaned to me but I can not get it to download the frequencies on the ic7000 .I suspect the interface cable but have no idea how test it. This is a

Hi Morrie, I use the IC7000 software from here: www.qsl.net/iz2nxf/ It is simple, and works just fine. 73 de Phil GU0SUP

Chirp. Free, works, no need to pay stuff here

Ditto on RT Systems. I have been using their products for years. Michael Gardner K1MLG iPhone ??

I have, works great. 73's - Glenn

2 others I know of besides RT Systems. Rumtrol7000 - can't find a download for it but I have it so DM me if interested. and IC7000BKT

RT Systems IC-7000 RADIO PROGRAMMING SOFTWARE https://www.rtsystemsinc.com/IC-7000-Radio-Programming-Software_ep_105-1.html

Has anyone used software to programme the IC7000.If what one.Thanks Morrie

Steve, I'm using a cheap BNC to "Mini Test Clip" 50 ohm coax cable.? Similar to this: https://a.co/d/5stAcq1 You're right in that I probably was getting reflections -- that would make sense --

Nick, At 124 MHz it is important to keep a relatively constant impedance path from P4 to the counter.? My 8924C has 50 ohm inputs and I used a 50 ohm 500 MHz rated scope probe, with a short barrel

Hi Steve, I'm using a Aim-TTI TF930 to measure P4.? I just received the counter on Tuesday and was wanting to verify my REF OSC on my 7000.? In recent weeks, I noticed it was way off on USB/LSB

Thanks I ordered a 5". ________________________________ Sent: Tuesday, March 28, 2023 9:14 AM To: [email protected] <[email protected]> Subject: Re: [ic7000] connecting external monitor Just be

This thread has got me thinking. I have a 5" display currently but I am going to try a composite/usb capture device to route the ic-7000 display to a window on the PC and see how that looks. May be

Looks great with a small (7-10 inch) TV sets such as those from Sharper Image and others (what I use with my go-box) DC operated and uses the same power source as your radio. I have a USB charging