开云体育

I made a small adapter cable and can use either ACC or DATA. And the mic I use (Astatic) has a built in amplifier with switch. I do not use the ICOM mic because it is dull. Forgot to mention that. The

If you use the ACC socket, it does not turn off the mic when you transmit. You can have ambient noise / voice transmit with the digital. I switched to the 6-pin DIN. How are you trying to decode

if you are going to use RTTY on a PC, just don't use the RTTY setting but the normal SSB setting.? ? In the RTTY mode, the TRX will itself decode the stuff on the display and have peaked filters

The audio fom the ACC socket is much better and is independent of the audio volume potentiometer on the receiver. Interfaces are available on the

Hi, everybody I am trying to decode some digital signals with no success. I connected the rear speaker output to my PC but the signal seems to be too much filtered and the software is not able to

It’s not scam go to this site http://www.yachttrack.de/ and type N7NZC in the left up corner ! PJ F1EKK --- L'absence de virus dans ce courrier électronique a été vérifiée par le

The ‘7000 is just back-up to the the marine SSB rig and the Inmarsat phone, isn’t it ?.

Contact me at w0web@...,I live in S.F. and have two 7000s one is for sale Happy Connecting. Sent from my Sprint Samsung Galaxy S? 5 Sport

Guy, After changing the diodes around, did you do a full factory reset? Maybe you did, you didn't mention it in your email. 73! Mark KA6WKE Author: 4NEC2 The Definitive

I was just there last Thursday! I have a 7000 and at-180 I could sell you. It was actually recently returned from Icom for a checkup. It’s in good shape.

Hey there guys, Hoping that someone can come through. I am on a boat. We have everything set up to cross the pacific, we are supposed to leave on Saturday from La Paz. The Icom 7000 is my primary

yeah, if i recall well the connector into the IT-100 is a small look like PS/2 keyboard / mouse plug easily damaged

Nope. No difference. It was sitting at about 11 o'clock when it's normally set to 12 o'clock. If I rotated if more CCW, I could block out a transmission like I had seen in the past. Still haven't

Could it be the cable itself that's faulty?

The problem you describe is caused by the tuner interface placing a voltage greater than 3.3 VDC on TUNER port pin 1, which is TKEY.? TKEY is clamped via two diodes to +3.3 VDC bus and to ground.?

I seem to recall that when the IC-7000 was released there was talk that the IC-7000 used the same data path/line for the tuner control and temperature control. I am guessing there is something wrong

LDG IT-100 ======================== de N2MLP Brian Monroe County PA cid:21CA93CE-AC8F-4FA3-8151-4E18E044767E@... ======================== Sent: Wednesday,

It sounds like a high SWR situation. Test the rig on a dummy load and Wattmeter. Check the 4 pin connection between the rig and the tuner. I have the LDG AT-100 Pro 2 which works with any rigs so

Hi all, Something is wrong with my IC-7000 or my LDG IT-100. It used to work very well before, but now I got this.? When I connect the LDG tuner with the cable to the IC-7000 the temperature