开云体育

----- Forwarded Message ----- To: rick (bear) giles <rlbrgiles@...>; joyce schoby <mountainaunty@...> Sent: Sunday, December 1, 2013 6:01 PM Subject: Fwd: T'was the Night... This is

Check the Heil Sound website -- there's a section on using Heil's dynamic mic elements with Icom rigs: http://www.heilsound.com/amateur/dspsettings/all_icom.php

I never had any problems with mine in my Mondeo.

The other year we hit -15c and I have never suffered from any nasty effects with my 7000 and it is permanently mounted in my van.

That was it...I figured it out ...Tnx...

Do you have the scan edge frequencies programmed into memory channels 1A and 1B? Steve, W3AHL

USA Icom radios generally have a one year warranty by Icom. Some dealers offer special promotions occasionally that provides an additional one year warranty arranged by the dealer (not Icom). You

Does anyone know how to do a VFO scan...?? With then radio in VFO A/B you press s-2/scn and the radio does not do a VFO a scan. It reverts to a memory frequency and starts the scan from that

Hi guys does anybody test the hc6 heil sound in ssb with icom 7000 ? or not particular differences between ic dedicated elements ?

All: Representing those of us North of the Mason-Dixon line (I'm in Northern MI), I can relate my experience that I have never had a radio fail in my mobile installations due to large temperature

Another slight risk with large thermal swings is it can aid “whisker” formation in low/no lead solder. The phenomenon is poorly understood so YMMV. BTW, when I stated to keep “LCD’s above

Thanks. I've found some Martin Lynch small print and I think it says all Icom product's have 2 years warranty with Icom. Anyway I'm just being over cautious. Its just that after a few hours it does

Thanks!

LCD display module can be permanently damaged by exposure to temperatures below the manufacturers minimum specified storage temperature (often -20 Cor lower). From a Kyocera document: "Liquid

LCDs will not freeze. There is no liquid in an LCD. I have LCD TVs in my motorhome and they have been down to zero F. Also, all autos today use LCDs and they operate at any temp. -Tom, W3TLN

The only time I have had mine run hot is when I run PSK and forget to turn the RF power down to about 5 watts. John V. Nelson ? KD8TZC From: "alex.c.lawler@..."

Hi Steve ???????????? Having had the issue with power poles myself. i found that they do some shrounds which have locking tabs on so i built a box with six power poles in side which gives

Toshiba (who made the LCD display module) no longer has their datasheets online, after selling the LCD product line to JDI. But similar products I've worked with spec the display for operation to -10

Frequency drift will be a bit of a problem, even though the rig has a built-in TCXO. How much of a problem will depend on what bands you operate and what you expect. The higher you go, the more

Never had any problem with mine in my truck since 2009 ln Chicago during winter months. Even after being parked for 10 to 15 days. BTW. - Ever heard any one complain of their Car Stereo LCD being