开云体育

Tony, I was wondering what software you use and interface. I can't get the 7000 to tx when in USB modes for digi stuff

Hi Most of these modes where used using a KAM which was a TNC with two ports the move to using sound cards and software is only as good as the software which is written. ?so many seem to be having

I just use audio tones in SSB mode for all my digital modes, rather than getting the radio to do FSK. Easier for me, since I use a wide variety of digital modes. -- 73 de Tony VK3JED/VK3IRL

Yep, no issues. Signal polarity is "normal" for Tx and Rx. Use the data port, make sure the radio is configured for 9600 bps and in FM mode. I used the second (10 kHz) IF filter. Haven't had a chance

I use the SCS Modem with Pactor II and III and no problem with the 7000 or the 706 MK IIG Gene Eugene C. Clark W4AYK Section Manager, Georgia ARRL, the national organization for Amateur Radio email:

All, I'm having trouble using the ic7000 in RTTY mode or not. I use mix w with the rigexpert standard interface. The trouble is this: When using the 7000 with mix w in USB mode it will not transmit

Would like to hear how well the IC 7000 does digital modes such as pactor ? Thank you 73 Kenny

Curious if anyone has used a DVRPTR with a 7000. Any tips, tricks, comments, complaints, etc.? Thanks, Dave S. W2PAX Naples, FL csxtbonevalley@... mailto:csxtbonevalley@...

Hi- I have seen this before but having trouble now- The VFO won't change frequency and I can't use the VFO to adjust menu params. When I turn the VFO I only get the KHz to move up and down by one. The

To all, Well, I do feel a bit embarrassed. Seems I overlooked the RTS checkbox on the RMS Express document from the files area of the Navigator Yahoo group. Check the box and it worked just fine,

What's the problem.. CAT Control or Soundcard issues ? ---In ic7000@..., <wally_m52@...> wrote: Is anyone doing this successfully? I have been trying to set it up with no luck, but posts

Du you have CAT- or soundcard problem ? Im not familiar with your interface ( have a microkeyer) but it should work with the same setting... Confirm you have set the right radio is in the winmor

I dont know what kind of problem you have... Is it a CAT interface or on the soundcard side (can you receive/transmitt) problem My setup worked from day one... ---In ic7000@...,

Is anyone doing this successfully? I have been trying to set it up with no luck, but posts in the Navigator group indicate the Navigator does work with WINMOR. I suspect my issue is with the way I

I just use a more old school solution - IMAP (POP works as well). :) -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

I guess that explains why I haven't seen them. :-) There are certainly other annoying things about Yahoo neo, especially speaking as a owner of another list. Mark

HI Everybody; I have found a way to block the annoying ads on the Yahoo site altogether, but it only works if you use Firefox. I recommend that everybody upgrades to Firefox anyways. There is an add

I do find that fact annoying, because the V2000 is a batter antenna on 6m than the HF wire, at least for "local" repeaters. No idea which is better for DX yet. It would have been nice if there was

A friend of mines had rx problems, and then "discovered" he had the ATT inserted. It does it unintentionally by doing a "Tuning" with the external ATU, and pushing unadvertitely also the ATT/Preamp

I will check this out. Thanks. Paul G 860-459-6801 Sent: Sunday, November 10, 2013 8:08 PM To: ic7000@... Subject: Re: [IC-7000] Reception on 6 meters Tone squelch turned on? Squelch / RF