开云体育

Hi Anthony, Congrat's on the Tech license and kudos for working on upgrading! General will be more fun, that's for sure... Also, you will like the 7K, I have been using one for a long time in my

Yes, I tried several different positions.? Still struggling.

Hello! Anthony, KN4ROR here from the Volunteer State! Just picked up Technician last year. Working on getting my General. I was able to find 2 clean IC-7000s and I am looking forward to learning more

Is the tx level control ON THE SIGNALINK turned up clockwise from 7 oclock?Sent from my Galaxy Tab A

Vin, The data port is the best way to go. It will mute the mic, where as the acc port will not. You will have the mic audio present if you don't unplug it! Carl AB1DD

Thanks Carl.? I was considering going to the breakfast this morning but overslept and moving slow.? STARC had a presentation on FT8 a couple of months ago and I am sorry I missed it. Yes, I am

Hi Vince, How are you connecting the audio in to the 7000? Look at page 24 in the manual. Are you using the Signal Link vox? I used the data connection when I did PSK with my 7000. I'm off to the Ham

Good Morning, I currently am trying to set up my Icom 7000 for FT8. My setup is: -PC (Win 10)(WSJT-X) - to Signalink USB - to Icom 7000 via ACC port - to Watt Meter - to 50 ohm Dummy Load -WSJT-X

Good Morning, I currently am trying to set up my Icom 7000 for FT8. My setup is: -PC (Win 10)(WSJT-X) - to Signalink USB - to Icom 7000 via ACC port - to Watt Meter - to 50 ohm Dummy Load -WSJT-X

Hello Javier, There is another group here that has a kit that will do, what I think you want to do. /g/MDSRadio I don;t have any personal experience with the kit but I have

Hi. I'm Javier (EA4FSD) from Spain. I'd like to install on my IC7000 a IF buffer amplifier to add it an IF out and use it as panadapter, like a DX Engineering Clifton Laboratories Z10000 (

For development or diagnostics it's great to have a display, and would likely leave that code in place if there's memory space so that a display could be optionally plugged in if one wanted to.?? I

I use RT Systems software, and programming is a breeze. They have a setup with the software and cable, and just plugs into the computer. I have all the repeaters here, plus a few HF nets in mine. As I

Thanks for the feedback Mark, I fully agree with you, the TFT color screen is me having fun (Understatement!), I am thinking of a version running off an Arduino namo (Hypersmall) or ESP32 (even

Just an opinion of a ~20 year user of an ATAS antenna: If I could build the ideal controller for it, there would be no display.? I don't want another box I have to mount, run cables to, then watch

Looking for pa -board for my Ic-7000 LA1PLA mr Bjorn

Yes that is the correct link... Well on that subject my first housing was FAR from being a succes! But learning from scratch and my MANY mistakes and with great help to assist me I think we will all

It's always a bit concerning when you have to re-key 50 records that already exist on the computer, more so when a CSV export to Chirp would be so easy to include. HRD does some pretty obscure stuff

OK! OK! OK! I got the message will keep you boys in the loop here... 73 Richard VE2DX