开云体育

Most all Icom owner/operator manuals can be downloaded in pdf online from the Icom website. Mark

Iain, 7K manual is available for download. Do a Google search to find a site. 73, Don, W1COG To: ic7000@... CC: tdko@... From: slatron@... Date: Mon, 31 Dec 2012 07:30:58

Gidday Tom, Hope you had a great xmas. In about 18 hours time we will walk into 2013, hopefully in great style <grin>. I bought the 7000 secondhand, but the seller had lost/misplaced the manual !

Turns out I had forgotten to set ICOM into the menu selection using the MODE button on the MFJ tuner. Once I did that everything worked. 73, Dick W1HIL

Turns out I had forgotten to set ICOM into the menu selection using the MODE button on the MFJ tuner. Once I did that everything worked. 73, Dick W1HIL

Turns out I had forgotten to set ICOM into the menu selection using the MODE button on the MFJ tuner. Once I did that everything worked. 73, Dick W1HIL

Turns out I had forgotten to set ICOM into the menu selection using the MODE button on the MFJ tuner. Once I did that everything worked. 73, Dick W1HIL

Charles, Please see my reply to Rex (message 33386) for the solution to my problem. Thanks for your suggestion but I am now completely able to press the TUNE button and have it work. 73, Dick W1HIL

Rex, you are so correct. I thought I had read the manual carefully but completely missed this step/page. I changed it and it now works just fine. Thanks for setting me straight. 73, Dick W1HIL From:

Lain: It seems You're doing everything but following the manuals, As previously reported, I have A Pwr1 amp and am using it with the IT with the ic7000 with no problem, why don't you do as the manuals

Hi Rick, No I had to get a special cable from Icom New Zealand, but it does not still seem to work. May have to go back to Icom to ask for more info, but they are closed for several days yet :-(

Ian: I also use the IC-PW1 AMP. WITH THE IC-7000 no problems. Used a OPC-599 adapter following the IC-7000 documentation. If you are running both the radios off the Amp. You will need a RS-232 cable

Hi Ian Although I am not familiar with your Icom 775DSP I did download a copy of the manual. From what I see the 775 requires a 8 pin plug for the amplifier hook up. The Icom 7000 requires a 13 pin

Dick -- For the SG-230 autotuner, SGC suggests saying "Aaaaaaahhhhhhhh" into the mic. That gives a pretty stable SSB signal to tickle the autotuner. So does holding the mic a foot away from your mouth

There is a menu setting in the MFJ-929 that has to be set to "Icom" before it will work. It is described on page 19 of the manual. I got nailed by that little detail when I bought my MFJ-929 a couple

I dont seem to be able to connect the IC 7000 to my PW1 amp. The PW1 works fine with my IC775DSP, so its looks like it is not a failure of the PW1. Any help/suggestions appreciated. Iain ZL1IW

Got my 7000 back today from Scott Malcom, working perfectly and super well packaged for the trip back. It was sent for the random smoke issue.Driver replaced, bias readjusted, minor alignments.

Thanks Steve. I was pretty sure my 3 + year old Icom 7000 did not have that feature! Happy New Year 73, Rick VE3FMC

I received my 7000 back from the Michigan ICOM service center yesterday. Replaced PA and driver transistor and aligned under warranty. FB now. -Tom, W3TLN

That would be appreciated! It's a nuisance, but not impossible to reach across the table to get to the tuner 'tune' button. ;-) Hope you had a good Christmas, and all the best in the new year (that