Ok I will do that. Thanks
Get
toggle quoted message
Show quoted text
From: ic7000@groups.io <ic7000@groups.io> on behalf of James F. Boehner, MD via groups.io <jboehner01@...>
Sent: Saturday, February 1, 2025 3:47:49 PM
To: ic7000@groups.io <ic7000@groups.io>
Subject: Re: [ic7000] Hf tx
?
James,
?
Before you do anything, make sure the power supply can handle the transmit current of the rig.? If it did it before, it’s probably fine.
?
And definitely, take out the blade fuses from the DC wires to the radio and reinsert in their sockets.? Repeat x 2.? Corrosion is a major problem on those contacts resulting in increased resistance
and voltage drop causing the radio to reboot when transmitting is attempted.
?
‘73 de Jim N2ZZ
?
From: ic7000@groups.io <ic7000@groups.io>
On Behalf Of James Weston via groups.io
Sent: Saturday, February 1, 2025 1:42 PM
To: ic7000@groups.io
Subject: [ic7000] Hf tx
?
I've owned my 7000 since new. Recently upon attempting to TX on hf the radio re-starts. Any ideas before I send it off? Tried different antennas same result. Haven't tried vhf or uhf.
