Re: 2 meter sideband audio
|
You need to put the RF tuning step at, or below, 100 Hz.? That will give you finer control of the "too-high / too-low" sound.
I'm not sure how frequency-stable the IC-7000 is, but you shouldn't have any trouble in the 2m band.?
Today we set up a portable station with a 2 meter Diamond horizontal Yagi, and we made one contact with another station on 144.200. While both of us were on 144.200 USB, the other station's audio sounded slow and low pitched. We tried adjusting the frequency to see if we could get it centered and sound right like on HF, but there was no frequency that sound right... only low pitched or high pitched.
?
Is there an issue with IC-7000 2 meter SSB mode or is there something else I should try to adjust to fix the audio.
?
Thanks
73
John Denison
KD5YOU
|
