The radio was set correctly. My understanding is that all the radios
that take the 6 pin mini DIN connectors were wired the same way. I
guess not. I was able to use that port out of my SCS Pactor III modem
just fine (so it is not the radio settings). The cable from my
Digirig to my FT-817 is one of those same cables, but it does not
play. That is ok, I have purchased a whole separate digirig device
with the 13 pin DIN cables, and I suspect that will work ok. These
arrive Saturday.
Thanks for letting me know about that menu setting (it was already set
correctly), but I did not know what that menu item did. Now I do.
73 de Chris KQ6UP
toggle quoted message
Show quoted text
On Thu, Oct 26, 2023 at 7:08?AM J.D. Barron <jeter.d.barron@...> wrote:
I would have thought that HSEND would need to be keyed for the HF digital port to work. Perhaps the pinout on the plug is mis-connected.
I used a signalink USB quite a bit with my IC-7000.
I thought about the ALE with the IC-7000 but listening to the relays click with each band change made me think better of that.
With ALE I would choose a radio with PIN diode band switching.
I don't have the IC-7000 manual on this computer to look at the pinouts to see how likely a wiring error might be, but I know that the radio should work with one of the many digital interfaces, including home made for $10.00.
--
Thanks,
Chris Maness
