Re: IC-7000 + Rigblaster Advantage + HRD
开云体育
Hi Don,
I have a RIGblaster PnP that I use with the 7K. In my case, I chose to use a separate USB cable for the CI-V, and then used the 13-pin cable adapter (from the RIGblaster) for the auxiliary port on the 7K.? There is also a cable you will need if you intend to use CW.? The cables are inexpensive. Cables for RIGblasters -
Hook Up Diagrams for RIGblasters - IC7K -
My extra cable - for Linux / macOS
?(CI-V
cable)
RT Systems Programming Software / Cable (I use this all the time, alternative to the Valley Enterprises
cable (I use that cable on a 706Mk2g):
In my case, the need for two cables was because I use not only Windows (10/11), but?also Linux and macOS (and there was not a port-splitter software like the Windows driver from West Mountain). I love the IC7K and RIGblaster - all digital modes and CW. 73's, Glenn
WA6BJQ
From: [email protected] <[email protected]> on behalf of m0cvz - Don <m0cvz@...>
Sent: Tuesday, October 17, 2023 12:33 PM To: [email protected] <[email protected]> Subject: [ic7000] IC-7000 + Rigblaster Advantage + HRD ?
Good evening all
I have scoured the forum but cannot find a definitive solution to my problem.... forgive me if this has already been covered and I missed it. I have a 7k and want to interface it with a Rigblaster Advantage, to be controlled by HRD, but I am stumped in regards to what cable to use, from the 7k, to the Rigblaster Advantage. I have seen a mono to stereo cable as well as a 6 pin Din plug being mentioned on the Internet but the dew posts I have read are somewhat cryptic. Both the 7k and the Rigbladter Advsntage are recent addition to my shack and any help getting them interfaced with each other will be greatly appreciated. My main rig is the 7300 so this a new realm for me. 73s Don - M0CVZ |
Glenn Jensen