Hi Hoffy I sprayed some contact cleaner down the cables where I could as they were tight and I didn't want to do more damage as I have no spares.Appears to be working at the moment will just have to wait
Morrie
toggle quoted message
Show quoted text
On 24/11/2021 4:51 pm, Hoffy wrote:
Hi Morrie, I had a similar problem with my 7000, I ended up replacing the ribbons but you might want to try just sliding them around a little within the sockets without actually pulling them out. These ribbons are all getting a bit long in the tooth now and by replacing all of them, most of my intermittent problems vanished.
73s & Good Luck,
Hoffy - VK4OY//
On 24/11/2021 12:05, ZL2AAA wrote:
Hi All My ic7000 is not showing anything on the display no frequency etc.It does receive the squelch works and if you are lucky you can sometimes find a frequency that is in use and copy the audio.This has happened before after it was left turned for most of the day but is now becoming more frequent.If it does come on by sliding the font panel off I can measure 3.3 v on one pin on the radio side.Any help appreciated
73 Morrie
