开云体育

Using HP GL/2 - direct printing etc.

caveteursus #194 I posted quite a few pages, there's more to do, but you will get the idea. It's on www.tech-diy.com you can play around with the codes, create a "*.txt" file and send it with the following commands: mode com1:9600,n,8,1,p copy myfile.txt com1 I use WordPad instead of NotePad, as WordPad has "find and replace". I've taken apart some of the Gerber files generated by Ultiboard -- they can be quite simplified -- the most annoying and time consuming is the AA -- arc absolute -- in Ultiboard a 1% angle is specified -- this can and should be changed using "find and replace" in Wordpad.
Daryl Owen #195 I would like you to correct some of the info on your web page. The following: "World's Messiest Darkroom/Electronics Laboratory" should read "World's 2nd Messiest Darkroom/Electronics Laboratory" Daryl toggle quoted message Show quoted text -----Original Message----- From: caveteursus [mailto:j.walton@...] Sent: Wednesday, December 19, 2001 6:03 AM To: Homebrew_PCBs@... Subject: [Homebrew_PCBs] Using HP GL/2 - direct printing etc. I posted quite a few pages, there's more to do, but you will get the idea. It's on www.tech-diy.com you can play around with the codes, create a "*.txt" file and send it with the following commands: mode com1:9600,n,8,1,p copy myfile.txt com1 I use WordPad instead of NotePad, as WordPad has "find and replace"..9.3I've taken apart some of the Gerber files generated by Ultiboard -- they can be quite simplified -- the most annoying and time consuming is the AA -- arc absolute -- in Ultiboard a 1% angle is specified -- this can and should be changed using "find and replace" in Wordpad. To unsubscribe from this group, send an email to: Homebrew_PCBs-unsubscribe@... Your use of Yahoo! Groups is subject to
Steven Greenfield AE7HD All Messages By This Member #196 Uh, you don't want to make this a competition. Only reason I wouldn't beat both of you is on a technicality, as mine isn't a darkroom. Caveteursus, thanks! I'm adding this to the Links section. BTW, if you post it with in front then it is a clickable link for most mail programs. toggle quoted message Show quoted text --- In Homebrew_PCBs@y..., "Daryl Owen" <picstuff@m...> wrote: I would like you to correct some of the info on your web page. The following: "World's Messiest Darkroom/Electronics Laboratory" should read "World's 2nd Messiest Darkroom/Electronics Laboratory" Daryl -----Original Message----- From: caveteursus [mailto:j.walton@a...] Sent: Wednesday, December 19, 2001 6:03 AM To: Homebrew_PCBs@y... Subject: [Homebrew_PCBs] Using HP GL/2 - direct printing etc. I posted quite a few pages, there's more to do, but you will get the idea. It's on www.tech-diy.com

Previous Topic Next Topic