I would like you to correct some of the info on your web page.
The following:
"World's Messiest Darkroom/Electronics Laboratory"
should read
"World's 2nd Messiest Darkroom/Electronics Laboratory"
Daryl
toggle quoted message
Show quoted text
-----Original Message-----
From: caveteursus [mailto:j.walton@...]
Sent: Wednesday, December 19, 2001 6:03 AM
To: Homebrew_PCBs@...
Subject: [Homebrew_PCBs] Using HP GL/2 - direct printing etc.
I posted quite a few pages, there's more to do, but you will get the
idea. It's on www.tech-diy.com
you can play around with the codes, create a "*.txt" file and send it
with the following commands:
mode com1:9600,n,8,1,p
copy myfile.txt com1
I use WordPad instead of NotePad, as WordPad has "find and replace"..9.3I've
taken apart some of the Gerber files generated by Ultiboard --
they can be quite simplified -- the most annoying and time consuming
is the AA -- arc absolute -- in Ultiboard a 1% angle is specified --
this can and should be changed using "find and replace" in Wordpad.
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@...
Your use of Yahoo! Groups is subject to
