Nope.? Don't do videos.
Now questions:
1) designing what?? Digital?? Analog?? RF??
2) what level of complexity?? Do you need 1 layer, 2 layer, or
4 layer boards?
3) do you intend to produce these boards yourself? (it makes a
difference in how you design them).
4) how big are they (can make a difference in either cost/who
makes it or design/what program you use)?
5) what program do you use?
6) have you any experience with PC board design?
7) what level of hardware debug do you want to put into the
boards (test points?? test pads?? logic analyzer breakouts??
ground posts?)
8) what kind of facilities do you have to make PC boards?
9) have you done any of this before?
10) what level (roughly) in electronics design are you
comfortable with?? beginner?? what?
All of these things have a bearing on *how* you design
something, what design you come up with, how many copies you'll
need before you get one that works (know that one.....), and
whether or not you can make the board yourself.
I know this may sound complicated,
but answers to some of these help others to gauge where you are
in experience, and what you need to know (IMHO, of course).
For me: (roughly)
1) designing:? Digital,? Analog.? Have done 100 pin
flatpacks. (self built), do 144 pin flatpacks when someone
else builds them).
2) I do double sided, plated through holes, silk screen, but
that's not me making them.? Have done toner transfer, 10 mil
trace, 10 mil spacing, double sided, wire stitch top and
bottom layers, tin/lead plated boards.
3) do you intend to produce these boards yourself? (it makes
a difference in how you design them).
4) no bigger than 100 cm * 100 cm because of the board house
limitations for cheap?
5) EAGLE 7.7, hobby (6 x 4 inch) license, can't sell the
boards.?
6) by this time?? a fair amount, can always learn more
7) logic analyzer breakouts for digital, pin headers for some
signals, some test pads, ground connectors, monitor leds
8) used to make double sided boards, not plated through,
designs got too complicated for me to make
9) lots
10) not beginner in digital, some analog, power supply
Other people will have different opinions.
Harvey
On 7/12/2020 12:59 AM, davethetechman
via groups.io wrote:
Hi, does anyone have any personal videos of designing with their own personal tips and hacks?
Recently new to this.
Thanks
?
