I've made an of some images from my printer. Sorry for the blurriness on some of them, one of my light systems just died so the exposure was long.
As far as I can tell, my main option is going to be to make a ramp which just goes down to the surface of the table the printer is on. I can't imagine the hole through the normal front cover will allow it to work.
On Thu, Aug 30, 2018 at 11:03 AM Mark Lerman <mlerman@...> wrote:
I am the author of those Instructables. Send me a picture of what the
front end of the printer looks like at this stage and I will help you as
best I can.
Mark
At 08:35 AM 8/30/2018, you wrote:
Hello,
I am attempting to convert a Dell 1720 printer using the 3rd revision of
the Lexmark
This method has gone pretty much perfectly up until now, but I'm left
with one of the difficult bits: how do I handle alignment and feeding of
the tray into the printer because I do not have a door to mount a guide
on.
I keep seeing references Michael "Mike" Sims (K4GMH) doing this
conversion successfully, but I can't find any pictures or other
clues.
Does anyone have information on the "front tray" mechanical
aspects of this conversion? Any pictures even?
If someone could even provide me with contact information that'd be
appreciated.
