Sounds interesting.
All I have right now are black mono printers, so I guess I would have to at some point go to the local printer.
Unless you want to try it for me. I probably should wait to hear from the customer , but if I have a price ready and color options,
that would at least be a start.
Steve Hearns
Technotronic Dimensions, VT [USA]
WWW.TECHNOTRONIC-DIMENSIONS.COM
1.518.663.3421 (MAIN)
1-877-817-9885 (Voice / Fax Toll Free - US Only)
E-Mail: Steve@...
--
Webmaster, Parts-Link: ()
Group Moderator:
TV-Repair ()
Monitor-Repair ()
toggle quoted message
Show quoted text
----- Original Message -----
From: "Harvey White" <madyn@...>
To: <
[email protected]>
Sent: Monday, July 09, 2018 8:55 PM
Subject: Re: [homebrewpcbs] Stenciling / template
On Mon, 09 Jul 2018 17:42:42 -0700, you wrote:
Yes, there is a white toner, but it is a specialty item. There is a lot more of it available than when it first came out, back when I was doing imprinting. You have to start with the correct make and model of laser printer.
Yet another idea. Print on transparency film, black. Use white
transfer film (use for color overlays on a laser printed piece of
paper) to transfer everything to white. You can get gold, silver,
etc. It's the same thing that Pulsar uses for silk screen lettering.
It has to be imprinted over the laser toner, so all of this is exposed
to wear, and has to be protected by either a spray coating or behind
something.
Harvey
Or they make CMYKW laser printers, now.
Kind of expensive for a one-of project.
Have you thought about having a sign shop cut it out in white vinyl? I've successfully cut and applied some pretty thin stuff. Mirror cut and put on the inside, of course.
Or you could have it reverse cut, stick to the glass, sand blast it a bit to give it a bit of tooth, spray paint in white, then peel the vinyl mask off.
I have a vinyl cutter and sandblaster, so that is how I do this.
