开云体育

Lyle, thanks for your explanation, that's very interesting and makes sense. George

Hello Go to message 3602 and then read all the replys--It gives a web site for the modification(easy) and then corrections Good Luck Doug T582

Hello JLS516, As with EVERY HAMMOND OR LESLIE, (for that matter, EVERY electronic musical instrument device) you will be altering the designed sound of the unit if you try to replace ANY CIRCUITRY

gdhiatt@... writes: Yessssssss, you are... Ken, I just couldn't help it... :) Love ya'll, Bill....

godfreys5@... writes: Keep in mind, I was raised in a rural area, went through 12 years of 4-H, I play the organ for church, I'm polite to the elderly.... and you think I'm going to ruin

WoW !!! gave you an M100, Cheap is good but free is best. Yes I will make it there one of these nights, look forward to it, thanks for the invite. Dan

Hi Eric, I think you should ask to Lars Karstensen. He used to post lots of messages a while ago, and if I'm not mistaken, he is a Hammond dealer in Europe. You should check out the Zone page to see

godfreys5@... writes: Hey Ken, You taught me a newbie !! Did not know about that one... Thank you, Bill...

Daz, You may be amazed by how much he will recover.. hang in there. Laddie

Chris, I guess I want to much. If you say the 760 amp sound fine, I just have to believe you. I never heard one! OK I will focus from now on to fix the 760 amp. But first what is the most common

This is somewhat technical. If you want pictures, diagrams etc let me know and I'll see about taking some. After about a half-hour of investigation, I decided to give up on resurrecting the 44W -

Hello All, I could not believe the amount of support I received from list members, many thanks to you all for the kind words. My Dad is home from hospital as of tonight, although his speech and

Thanks a lot for the clue It is good to be here with clever zonners. Take care friends eric --- tonewheelken <ken.churchill@...> wrote:

Herbert, I ran into the same problem. The XK-2 isn't stage friendly enough to serve as a midi-controller. Unless I skipped a page in the owners manual, there is no way to easily toggle back and

Gandert, If you want to make your 760 sound exactly like a 122, then you'll need a 40 watt tube amp, and a 16 ohm bass driver and crossover to match. If I was you I'd take the easy route and repair

About a hifi amp. If I use the l100 amp(el84) I will get the organ amp sound, right? Off course a leslie amp will sound different but my leslie 125 is now connected directly to the same amp(i don't

Thanks!!!! Lyle.... I think the tech from Goff gave me the right info...I have too much hum from the on-off switch on the X66 that was interfering with sound....Maybe I just am not happy with the

Chris, You got a point there. I also am a guitar player. And indeed nothing beats my fender twin especially a hifi amp. Bu what should i buy then? There were people on the zone that by replacing the

Gandert, Design philosophy of a Hi-Fi amp is that it should have no "sound" of it's own, i.e. should neither add to or remove anything from the original signal, just amplify "transparently". On the

Buyer pays shipping.......hmmm...enough to make me pass on that..even though the first bid is at $9.99 !! Frankly, I like the finish on the refrigerator in the picture much better,