开云体育

The Leslie kit should work on the A-100 no prob, what is the kit #? Ron Bell.

Someone was looking for drawbars. http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1518389549 Cheers, Ron Bell.

Hi Jeff, Here is a list of everything you will need. 1. The 26-1 connector box. 2. Tremolo switch 3. Main echo ensemble switch. 4. A 5 pin female amphenol connector and some wire{red,blue,green,gray

Jeff, If you don't want the 251, please let me have a chance at it.. Laddie

where do you live? what were u doin in edmonton... i live in calgary if you're here on wednesday night i have a HOT jam for you to show up at Dave Dan & Connie Sinasac wrote:

In cleaning up on the RT-2 there are a few wires that maybe a mouse cut on the pedals system. can these be soldered back on and any thing special to look for. The kit that was on this for the 147

I don't have any information on your pre-amp, but I can tell you the pinout of the 7 pin plug on the organ. Pin 1 Drawbar "A" Pin 2 Drawbar "B" Pin 3 AC mains Pin 4 Ground Pin 5 AC mains Pin 6 Tab

Hi Ron, I have found a 26-1 kit but all i get is just the box withe the plugs and such installed.I already have the half moon switches is this all i need.I found this on ebay so it won't be there very

Two small differences: 1) The rotors spin in the same direction. 2) The treble motors are set up side by side with a larger drive wheel rather than one over the other. this is for lack of head room

Ken, Actually i do have access to a 251 amp.A good friend said he might do some trad'in if i wanted it.As far as reverb goes i only want it to go through the a-100 spkrs.I about half afraid to put it

Hi Ken, Yep i found a loose one.It was hiding under a silver screw off cap on the ao-28.I moved it around alittle and presto problem resolved. thanks....jeff

Thanks Mike that should be enough info to locate a copy jeff

Mike, Yes, just as good technically, I probably wouldn't notice if it was made of old packing crates. I'd be too busy getting the back off to see how it worked!! Chris Clifton There is a theory which

Chris ; All I'm saying here is if the 251 Leslie is the better match for the A-100 ect. Then the 351 Leslie is just as good of a match depending on your taste in furniture. Don't you agree ? Mike

At the Yardbird Suite in Edmonton Alberta Canada, I spoke to him about my rig and he was interested in coming to my studio to check it out, I bought his CD and then gave him mine to see if he would

I can tell you where to start. The motor speed control uses triacs to remove parts of a sine wave. The more parts of the sine wave that are removed the slower the motor turns. By removing just parts

Can any one tell me what do???? I have an X66 and it is connected to a Condor Sound System made by Hammond...The pre amp is going and I want to buy a new one...The one I have now is a home made pre

Ken, You ain't just whistl'n Dixie, what an amp! The 2A3s are not only plentiful, but are still made. Svetlana makes one of the sweetest 2A3s ever built. It's the 56s that can be hard to find. Yes, I

Hi We use industrial cotton thread. Just use the same gauge. You can get this from any factory supply house. Such as Grainger Inc. Shayes Steven Hayes Sr Engineer Speakeasy Vintage Music

Hi They make such controls now. You would start with a AC inverter. They use these items for conveyor speed control. But I think cost will open a eye. They start at 350.00 + Shayes Steven Hayes Sr