The AO-29 in the M series including the M-100's, and the AO-28 in B-3, C-3,
A-100, RT-3 and the D-100.
I posted this earlier, this is detailed instructions on how to adjust it,
Happy overdriving,
Ron Bell.
toggle quoted message
Show quoted text
----- Original Message -----
From: "Laddie Williams" <laddieray@...>
To: <hammond_zone@...>
Sent: Wednesday, March 06, 2002 4:11 PM
Subject: Re: [hammond_zone] Screw
Ron.. which organ or speaker amp are you talking about.. Please, I have
never been there and done that.
----- Original Message -----
From: Ron Bell
To: hammond_zone@...
Sent: Wednesday, March 06, 2002 5:42 PM
Subject: Re: [hammond_zone] Screw
You dont have to remove the screws, just the little round plug. It is a
variabl capacitor not a volume controll, turn it all the way clockwise,
this
is the quietest setting, do not turn it more than two turns counter
clockwise. If you screw it fight out it is a big pain to get it back in.
And
like I have already posted not to much overdrive or you will toast your
V-21
and these are no longer made although I have heard the 100w ferro-fluid
driver from Ham-Suz is a good replacement and can stand up to a little
more
overdrive.
Cheers
Ronnie
----- Original Message -----
From: "Nick Renich" <nrenich@...>
To: <hammond_zone@...>
Sent: Wednesday, March 06, 2002 2:30 PM
Subject: Re: [hammond_zone] Screw
> Mounted on the centre of the pre-amp is a small rectangular aluminium
box
> about 4 inches by 3 inches. Remove the screws to reveal the volume
control.
> At the top is a small slotted screw which you turn left to increase
> distortion or right to decrease it. Takes about 1 minute and the organ
> sounds like heaven. Actually it already sounded like heaven.
> ----- Original Message -----
Yahoo! Groups Sponsor
ADVERTISEMENT
Visit The Hammond Zone
To unsubscribe from this group, send an email to:
hammond_zone-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Visit The Hammond Zone
To unsubscribe from this group, send an email to:
hammond_zone-unsubscribe@...
Your use of Yahoo! Groups is subject to
