|
Raul de Jalapeno
Hang in there, Sam. i'll be down in a couple of weeks to lend moral support.
toggle quoted message
Show quoted text
raul ----- Original Message -----
From: robbidobbi@... To: hammond_zone@... Sent: Saturday, March 02, 2002 10:57 PM Subject: [hammond_zone] RT-2 Well I spent most of the day trying to clean this RT-2. A couple of the wires had been cut on the pedal board. I soldered them back i just hope i got the right wires to the right contact??? i guess i will know if this thing gets going and the sound is wrong. there was a thick wire cord that went from the main power box where the power cord plugs in and i assume that this thick cord with a 5 pin thing was were the hammond tone cabinet was plugged in??? the wires were so cracked and bad and i didn't think it would be used so i took the whole thing out. I also think that i will replace the main cord going from that box to the main with a better cord. I was taking the keys out to clean them and one of the metal bars broke where you screw it in. I guess i will have to find a replacement. looks like that roaches and gecko lizards were living in there at some time. lots of signs and droppings!!!!! yuck!!!! the cabinet is going to have to be redone where do i start? do i strip it or sand it or what??? the finish is completly gone. Boy this thing is really turning in to a lot of work!!! and i haven't even touched the leslie yet and it's just as bad. oh well i so enjoy doing it and it is a challenge. any tips or helps would be appreciated. sam Yahoo! Groups Sponsor ADVERTISEMENT Visit The Hammond Zone To unsubscribe from this group, send an email to: hammond_zone-unsubscribe@... Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
