开云体育

I think I want to mount an ?LED strip right across the top of the meters and wire it to the 12V rail on the meter board and ground.?

But what I really would like to do is run 2 LED strips, 1 red and 1 green. I would like to have only red lit when in standby and only green when in operate.?

There is that extra pole not used on the standby switch. Wish it was a 3 pole switch to have 2 free poles.?
But I see 3 terminals on that unused pole, I think it may be a double through? If it is, maybe I ban have both LED strips share a neg on the center terminal. 12V on the top terminal to one strip and 12v to the bottom pole to the other strip.?
I just need to confirm that the middle and bottom terminals make the short in the operate position while top and middle are open. And that top and middle terminals become short while bottom and middle open in the standby position.?
If they do, then I could wire the top and bottom terminals to the 12V bar on meter board and the center terminal to ground.?
Would there be a problem in that??
That would be crazy cool!! Meters turn red in standby and green in operate.