开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Ham-Amplifiers
  2. Messages
Single Messages Topics Expanded Polls

Re: HV Wire

 

I believe Tim is the president not the owner of DX Engineering.

On Saturday, November 23, 2024 at 01:18:56 PM EST, Kim Herron <kim.herron@...> wrote:


Belden does make an 8 mm silicone solid wire spark plug wire.? You can buy the wire in bulk.? It's probaly the same stuff that Summit is selling.? For those that don't know, Summit and DX eng. are both owned by Tim Duffy

Kim Herron W8ZV kim.herron@... 1-616-677-3706


On Saturday, November 23, 2024 at 11:46:23 AM EST, Bob via groups.io <w4jfabob@...> wrote:


Solid spark plug wires are not resistive wires. You have a good point about being stiff. I now remember buying some bulk plug wires that were stranded, not
resistive wire. I now remember making a set for a boat engine.
Check this link...


Some are resistive and some are not. The more I think about it, the more I feel that they can work.

Bob W4JFA

On Sat, Nov 23, 2024 at 8:37?AM Mike Sawyer via <w3slk=[email protected]> wrote:

Spark plug wire is ok so long as it is not of the ‘resistive’ type, (I’m dating myself with that!). For all my projects above 1KV, I use boiler igniter wire. This stuff is good to 20KV and has a silicon insulation. I’ve use other that was sort-of ‘double insulated’, (main insulation with an outer jacket). But that was extremely stiff and I often though if too tight a bend were made, the insulation would break! I’d hit the local auto parts jobber to see what they have available or maybe an electrical store. Also on an afterthought, some test-lead cable is also rated to 6KV. A few options for you.

?

Mod-U-Lator,

Mike(y)/W3SLK

?

?

?

From: [email protected] [mailto:[email protected]] On Behalf Of Bob via
Sent: Saturday, November 23, 2024 8:26 AM
To: [email protected]
Subject: Re: [ham-amplifiers] HV Wire

?

Mark, I have never looked into this but what about solid spark plug wires? I know you can buy that in bulk and the quality?

is all over the board. Usually?the quality of the wire itself is fine but the insulation is the variable.

What do you think?

Bob W4JFA

?

_
Join [email protected] to automatically receive all group messages.