开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Ham-Amplifiers
  2. Messages
Single Messages Topics Expanded Polls

Re: Need advice on HV connectors

 

If you were to 'sing the praises' of those Millen HV connectors, which are
advertised up to 7KV, Shane, WP2ASS, might bop you on the nose! I have used
them to 2KV but I would go much above that because they lack a lot of
protection where the wire goes into the connector itself. I have some SHV
that require RG-58 or a reasonable facsimile thereof. Recently I used
these:

One of the companies that makes a Megger uses it to 10KV. I'm only using it
for 2KV but the bare conductor is buried deep inside the ABS probe so that
it isn't exposed. The only issue I see is that the manufacturer doesn't
state the current. It didn't bother me since I was looking at a max of about
300mA on my modulator. However, YMMV!

Mod-U-Lator,
Mike(y)/W3SLK

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of Amp Guy Llc
Sent: Thursday, November 21, 2024 6:54 PM
To: [email protected]
Subject: Re: [ham-amplifiers] Need advice on HV connectors

Google Alden High Voltage connectors

On 2024-11-21 16:16, Dave w6de wrote:
Using connectors and cables for other than their original intended
purpose is an invitation for a potentially fatal disaster in the
future.

Don't depend on haphazard grounding for HV power return, run a
separate dark cable for the HV return in addition to having a common
shack grounding system.

Use bright red HV cables and purpose built HV connectors. Millen HV
connectors have been used in Amateur radio applications for a long
time.


illen+High+voltage+connector&_sacat=0&_odkw=millen+HV+connector&_osacat=0
[1]



73,

Dave, w6de

From: [email protected] <[email protected]> On Behalf Of
Kim Herron via groups.io
Sent: 21 November, 2024 18:06
To: [email protected]
Subject: [ham-amplifiers] Need advice on HV connectors

HI all,

Thanks for reading the mail. I have acquired a home brew amp

and power supply that is missing its HV cable. I'd like to change
both

of them to one style since they are both different. Jack Schutt K9GT

originally built this. I'd thought about using SO-239/PL-259's that
are

Teflon with RG-8 inner conductor cable as the HV wire and packing

the PL-259's with RTV-108 and sleeving the wire with GOOD Belden

heavy shrink tube with sealant. Does that sound like it would hold

5 KV since that's what Jack built the power supply too? Thanks

for the input and reading the mail.

Kim Herron W8ZV

w8zv@...

www.goldenradioservice.com [2]

616-677-3706



Links:
------
[1]

illen+High+voltage+connector&_sacat=0&_odkw=millen+HV+connector&_osacat=0
[2]
[3] /g/ham-amplifiers/message/40718
[4] /mt/109709173/8135091
[5] /g/ham-amplifiers/post
[6] /g/ham-amplifiers/editsub/8135091
[7]
/g/ham-amplifiers/leave/12941173/8135091/773995006/xyzzy
Join [email protected] to automatically receive all group messages.