Here, the paralleled pair of Jennings? RJ2B output vac relays are installed.....along with the 7-16 DIN output connector.
Also installed is the 1/2" silver plated tubing coil, used for 20 + 15m.? ?Also installed is the hb? 3/8" tubing coil, used for? 80+40m.? The hb cu discs
?are cut and installed for the vac tune and vac load caps.? The? hb 1/4"? ?tubing coil (used for 160m) is wound, but not yet installed, nor the 100mm diam Draloric plate block cap.? On the rear apron,? you can also see the pair of 100 amp, superior electric ...'supercon connectors', used to terminate the cables for the 7.0 vac @ 78 amp fil supply.? It's progressing pretty good.? The entire B+ supply has yet to be built... but is a straight forward project, since it's already been done several times before.? ?
