Mike,
?
I bought a bunch of these SHV connectors and
bulkheads from Powell, a Kings stockist/distributor. rmilligan@...? , Ryan
Milligan from Powell was kind enough to send a handul of these conector over the
pond to The Lowlands.
?
However, I do not like them. They are in physical
terms too flimsy and do not accept?a 11 mm coaxial cable for HT connection
purposes. Currently my 3 phase HT psu is connected to the desktop RF deck wit a
silicone insulated coaxial cable which is hard wired on the choke in the amp and
on the cap stack in the 3 phase HT psu.
?
Cheers, Dick
PA3DUV
?
.
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Saturday, September 23, 2006 10:29
PM
Subject: Fw: [ham_amplifiers] Jumbo sized
lytic stack for HV supplies ! Oil cap warning. DIODES
Let me correct this:
Jim said: This is my "external cap box". I used Millen Red/ Black HV
connector's on it. IF using the Millen's.... either use
nylon mounting
screws or mount em on Micarta. Both Kings and
ROWE make better HV
connector's imo.
Where can one find the Kings or Rowe connectors? The
only thing I have in my junk box are the Millen Red and the brown phenolic. I
understand the brown ones *aren't* very good. However, my local parts jobber
confided in me that the Millen connectors were supposedly rated for 4500
VDC.
Mod-U-Lator,
Mike(y)
W3SLK
