FTX Encoder problem.
While testing my mount after purchasing it used on the internet, the Alt axis numbers displayed on the Sky Commander screen looked like numbers were being skipped.? The wire leading from the SC to the Alt Axis encoder looked taunt.? I could not understand how the encoder covers were fastened over the encoders, but I could see that one wire looked suspect.? There is one bolt that holds the cover in place.? I removed it , but the cover seemed firmly fixed to the encoder / shaft.? I finally just grabbed the cover and found that I could "work" it off the encoder.? (Just a tight fit.)? With the cover off it was evident that one wire was not well secured in the encoder connector.? I tried to fit the wire in place, but no luck.? I contacted Victor at Skyengr.com and he offered to make a new custom? harness with the proper end plug for the SC on one end and longer wires for each encoder with new 5 pin connectors on each end.? Everything fit,? Works properly, an easy fix.? Thank you, Victor.? ?(My main problem was trying to figure out how to remove the encoder cover.)? And so it goes.
Don Sannes
?
Donald Sannes