Re: Troubleshooting Elektor SDR Shied? New Installer
|
hello Peter
Sorry but i quit the install about the sdr software...i became too much trouble by install the soundcard and the tx mode is not in the g8jcfsdr.
Gonna switch too an other system like HackRF One.
wish you all very succes with the Arduino SDR shield.
Berend PA0BZC
Hi All
I have updated the installer for G8JCFSDR Build 282 and made it available on the G8JCFSDR site
I have tested the new installer and it seems to work on my machines, but the real proof that the problem has been solved is for other people to try it out on their machines please, (NB if you need to regress to Build 280, in addition to uninstalling build 282, U will also need to use XLoader to upload the 1.2 firmware after U have installed Build 280).
I would be really appreciative if you could confirm that this new installer works correctly.
Thank You Eveyrbody for all your help in helping me fix this problem (I hope !!), and look forward to feedback
73
Peter - GM8JCF
|
