On Jan 25, 2024, at 6:00?PM, g4hfg via groups.io <g4hfg@...> wrote:

?

Terry,

I have not received any request to verify anything.? Please clarify.

73

Graham

G4HFG / W4HFG / GB7DLRepeater

?

From: [email protected] [mailto:[email protected]] On Behalf Of Terry M. Stader
Sent: Thursday, January 25, 2024 10:54 PM
To: [email protected]
Subject: [Special] [g2-link] Verifications for groups.io

?

Over the last few weeks, you may have gotten an email asking you to re-verify your subscription to this or other groups.io lists. This is a legit email and if you want to remain active, you should verify it is really you and not a bogus account. This is Groups.io’s way at taking out SPAM.

Hopefully everyone is well and getting 2024 off to a good start?

Terry
--
Terry Stader - KA8SCP
D-STAR Gateway & Reflector Admin

?

Over the last few weeks, you may have gotten an email asking you to re-verify your subscription to this or other groups.io lists. This is a legit email and if you want to remain active, you should verify it is really you and not a bogus account. This is Groups.io’s way at taking out SPAM.

Hopefully everyone is well and getting 2024 off to a good start?

Terry
--
Terry Stader - KA8SCP
D-STAR Gateway & Reflector Admin

?

FYI

--
Terry Stader - KA8SCP
D-STAR Gateway & Reflector Admin

From: [email protected]
Date: December 8, 2023 at 6:05:51?AM EST
To: "Terry M. Stader" <ka8scp@...>
Subject: [OpenDV] [email protected] Digest #489

ircDDB-Server currently down From: Hans-Juergen Date: Thu, 07 Dec 2023 12:52:15 EST Hi! It is already some time ago that I wrote here at this place. Just a quick note for those who have their DSTAR gateways connected to the ircDDB network: The ircDDB webserver crashed yesterday early morning. We have already a new cloud system running parallel since beginning of the year, but still did not do the final step and move all data to that system. I talked to our provider and they found that the hardware where our old VM runs on is completly down. They will need a few hours to fix it and we will hopefully see it back shortly. The ircDDB network still works full functional, the IRC servers in the 2 groups are up, but status pages and the registration system are currently not available. Michael DL1BFF fixed an issue with the dynamic DNS feature which was reported, it should work now again. We decided to take this issue as a final trigger and complete the move to the cloud system within next days. The old server still run an outdated CentOS version with very old perl and php scripts. This needs to be adjusted to work on current supported Linux versions. The server was on air 24/7 since 2015 without any real failure. Before we had 2 servers located in Switzerland for some years and at the early beginning in 2008 we started on a server from the German Amateur Radio Club. We hope to have the old system back again tomorrow and want to switch to the new cloud based system until Christmas: With that we should hopefully be save for another 8 years. :-) 73 de Hans DL5DI ircDDB team

On Nov 17, 2023, at 8:00?PM, John Walker <inprinter@...> wrote:

?Terry, This would be for the W9NTP DStar repeater located in Shelbyville, IN. It is a ICOM system running the G3 Gateway software. Our Indiana Statewide DStar net is considering moving the weekly net to Reflector 181A which I cannot currently connect. It is my understanding that g2_link would help solve this problem. Any information you can provide about installing and configuring this software would be most appreciated. I would forward it to my Linux IT person.

John Walker, K9SVL
BRVARS Repeater Trustee

inprinter@...?

Hi Terry,
Yes I did setup a XLX Server with the ability for users to connect via XRF or DCS to that server. So my next task is to figure out how to get ICOM G3 to be able to connect to the XLX Server. Great to hear this will work. I will give the document a read, assuming all info is in there in terms of how to install g2_link?

Thanks
Tony, W7XM

On Sep 17, 2023, at 4:17 PM, John Hays - K7VE / WRJT-215 <john@...> wrote:

?BTW, I have g2_link on a G3 system now but it looks like I need to disable monlink and modify the dashboard.?

On Sep 17, 2023, at 4:17 PM, John Hays - K7VE / WRJT-215 <john@...> wrote:

?BTW, I have g2_link on a G3 system now but it looks like I need to disable monlink and modify the dashboard.?

Tony, I’ll send you the install document shortly. The original developer did not want the software in the “wild” so it is not public. I am open to others want to chip in and assist with any new development efforts. I am not a developer, just one of the keepers of the code so to speak.

Terry M Stader KA8SCP
WB1GOF Repeaters Proprietor

On Sep 16, 2023, at 6:48 PM, Tony Langdon <vk3jed@...> wrote:

?Hi,

I'm with a D-STAR user group which has a long standing Icom repeater stack with G3 gateway. As this is an important site for USTRUST registrations, we want to keep our G3 gateway intact, but add connectivity to XRF and DCS reflectors, as I run an XLX reflector that our user base is unable to access (I also run a dplus reflector which is heavily used by the system).

As I am more familiar with the open source systems (ircDDB, xlxd, etc), I'm doing the research for adding the capabilities to access these systems to the gateway, and am working with the repeater admin who does the hands on work with the system.

I found out about g2_link by asking around the OpenDV group, and got led here. g2_link looks like one of the pieces we need to upgrade the system, and I would like to get it installed on our system. What do I (or more correctly, what does our admin) need to do to get g2_link running on our system?

On Sep 16, 2023, at 6:48 PM, Tony Langdon <vk3jed@...> wrote:

?Hi,

I'm with a D-STAR user group which has a long standing Icom repeater stack with G3 gateway. As this is an important site for USTRUST registrations, we want to keep our G3 gateway intact, but add connectivity to XRF and DCS reflectors, as I run an XLX reflector that our user base is unable to access (I also run a dplus reflector which is heavily used by the system).

As I am more familiar with the open source systems (ircDDB, xlxd, etc), I'm doing the research for adding the capabilities to access these systems to the gateway, and am working with the repeater admin who does the hands on work with the system.

I found out about g2_link by asking around the OpenDV group, and got led here. g2_link looks like one of the pieces we need to upgrade the system, and I would like to get it installed on our system. What do I (or more correctly, what does our admin) need to do to get g2_link running on our system?