开云体育

Here is an idea on this issue. Created a bash script that checks the size of a specified file. If the file size is not zero, it stops a specified service. If the file size is zero, it checks the

Here is a challenge… If g2_link is running with dplus, we want to make sure that a repeater module is not connected to both an REFxxxy reflector at the same time as connected to XRFxxxy. There is a

<jmm@...> wrote:

Quite awhile ago, Ramesh and I played around with an application that went on the PC that the DV Dongle was attached to. That app forwarded the 20001 UDP traffic to 30001 and out to the g2_link

There's a lot of history behind why an ICOM gateway must use DPlus to link to REF reflectors and g2-link to link to other protocol reflectors. Briefly, g2-link came from an early digital voice

Got the chance to actually test out the g2_link install I did the other day during Friday's Cannet. I still haven't got things set up for automated connection to one of the XRFs a little closer to

<ka8scp@...> wrote: Yes he did and I put that in a text file on the GW. WHO WOULD EVER DO THAT NOT ME CERTAINLY BUT IF IT WAS IT DID HAPPEN WOULD HAVE BEEN BY ACCIDENT. :) monlink

Peter, monlink only knows dplus via monitoring the dplus.log file. It does not interact with g2_link or the g2_link.log file. Terry M Stader KA8SCP WB1GOF Repeaters Proprietor -- Terry Stader -

I sent some script examples and posted the list of commands in a previous message. Rob captured the essence of the principle commands for lining and unlinking. It is critical that you coordinate any

Ah! I understand. From one of the previous posts on this group, the following commands exist (ported from when it was dextra from what I understand) The following commands can be sent to dextra_srv

Oh, monlink knows nothing of non-DPlus reflectors. I'd just like to find the docs that let me know what commands I can send via netcat and how they relate to the commands I can send over RF. I had

Hi Peter, I am listening to the Can-net at the moment (just started about 20 minutes ago), so perhaps I will hear you on here later tonight? I cant speak much to the coordination with monlink as I

<ka8scp@...> wrote: Forgot about Cannet tonight. Started to look at this to construct a connect script to XLX044A ... but where are things like the um and lm defined. I figure

There is a working example tpl in the Files section that has the information you are trying to add. Feel free to modify the example I guess if it doesn’t float your boat. DPLUS

<robert@...> wrote: Bah - no sweat. I'm happy to see folks contributing! From what I can see, admins cannot modify (easily) the DPlus dashboard. No so much once I found

Thank you, an oversight on my part for sure. Rob VY1RG ________________________________ Sent: February 2, 2025 20:07 To: [email protected] <[email protected]> Subject: Re: [g2-link] timeout ... I

I use scripts to start up connects and disconnect cron for the various nets. For example: [root@wb1gof my_scripts]# cat xrf221a-c.sh #!/bin/bash # script to automatically connect # C port to

Except for that, it all worked as advertised - thanks to all of who have worked on the project! I am currently thinking about my strategy for Cannet. Currently, monlink handles switching us from

I see it is not in Robert’s AlmaLinux version of the instructions… I’ll add it tomorrow and put the updated file in the g2_link file section of groups.io Terry Terry M Stader KA8SCP WB1GOF

It is there ======== # personalize the cron.d dashboard file # make sure to change output location to /var/www/html/ #/root/g2_link/g2_lh -m "B" -o /var/www/html/fs.html -b "$GW_CALL D-STAR" -r -t