开云体育

Single Messages Topics Expanded Polls

Re: timeout ...

Peter Laws All Messages By This Member #172 Except for that, it all worked as advertised - thanks to all of who have worked on the project! I am currently thinking about my strategy for Cannet.? Currently, monlink handles switching us from REF069C (our default) to REF038A and back again.? Monlink, as you said, only works with DPlus reflectors so I'll need to cron the Cannet connection. Is XLX044A still the "right" place for us to connect?? Or is there a "more correct" target for the Cannet? ? Peter toggle quoted message Show quoted text On Sun, Feb 2, 2025 at 10:07?PM Terry M. Stader via <ka8scp=[email protected]> wrote: I see it is not in Robert’s AlmaLinux version of the instructions… I’ll add it tomorrow and put the updated file in the g2_link file section of Terry? Terry M Stader KA8SCP WB1GOF Repeaters Proprietor? On Feb 2, 2025, at 10:02?PM, Terry M. Stader <ka8scp@...> wrote: ?It is there? ======== # personalize the cron.d dashboard file # make sure to change output location to /var/www/html/ #/root/g2_link/g2_lh -m "B" -o /var/www/html/fs.html -b "$GW_CALL D-STAR" -r -t /root/g2_link/g2_lh.tpl $GW_CALL # NOTE: Non-standard gateway IP g2_lh -? reveals option # example: -a 192.168.1.172 #after cron runs, new g2_link dashboard at " ========= Terry M Stader KA8SCP WB1GOF Repeaters Proprietor? On Feb 2, 2025, at 9:52?PM, Peter Laws via <plaws0=[email protected]> wrote: ? Duuuude.? Can we get that added to the readme?? I suspect that a lot of folks have normal IPs since G3(.0) came out and the 10.0.0.silly addresses are mandated any more. THANK YOU! ? On Sun, Feb 2, 2025 at 9:41?PM Terry M. Stader via <ka8scp=[email protected]> wrote: Are you using the Icom standard 10.0.0.2 IP for the gateway? Otherwise you have to specify the IP in the cron job… ? See message /g/g2-link/message/84?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Arecentpostdate%2Fsticky%2C%2Cg2_lh%2C20%2C2%2C20%2C104259816 ? [root@wb1gof g2_link]# /root/g2_link/g2_lh -? Usage: g2_lh [OPTION...] g2_lh [options] <repeater call sign> ? ? -a, --address=10.0.0.2???? IP Address for g2_link ? -b, --banner=FreeStar???? Banner message ? -d, --debug??????????????? Make output file human readable ? -m, --modules=ABCDE??????? Report link status on modules ? -o, --output=stdout??????? Output html file spec (renamed from temporary ???????????????????????????? file) ? -O, --direct=file????????? Direct output html file spec ? -p, --port=50001?????????? IP Port number for g2_link ? -r, --register[=DStar.do]? Registration pointer ? -t, --template=file??????? file specification for template ? -u, --user=call??????????? Dashboard user's call sign ? -v, --verbose[=level]????? output to stderr: 0=silent, 1=errors, 2=warning, ???????????????????????????? 3=Information ? -?, --help???????????????? Give this help list ????? --usage??????????????? Give a short usage message ? Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options. ? Terry ? From:* [email protected] <[email protected]> On Behalf Of Peter Laws via Sent: Sunday, February 2, 2025 9:24 PM To: [email protected] Subject: Re: [g2-link] timeout ... ? ? ? Yup. ? ? [root@dstar-gw html]# find / -name g2_lh -ls 201837346 ? 4164 -rwxr-xr-x ? 1 root ? ? root? ? ? 4261984 Feb? 2 17:14 /root/g2_link/g2_lh [root@dstar-gw html]# find / -name g2_lh.tpl -ls 201837345 ? ? 12 -rw-r--r-- ? 1 root ? ? root ? ? ? ? 8719 Feb? 2 17:14 /root/g2_link/g2_lh.tpl ? ? On Sun, Feb 2, 2025 at 9:15?PM Terry M. Stader via <ka8scp=[email protected]> wrote: Did you verify the file locations? ? [root@wb1gof cron.d]# cat dashboard MAILTO="" /1 * * * root /root/g2_link/g2_lh -m "BC" -o /var/www/html/fs.html -b "XRF/DCS" -r -t /root/g2_link/g2_lh.tpl WB1GOF ? [root@wb1gof cron.d]# cd / [root@wb1gof /]# find -name g2_lh ./root/g2_link/g2_lh [root@wb1gof /]# find -name g2_lh.tpl ./root/g2_link/g2_lh.tpl ? Terry ? From: [email protected] <[email protected]> On Behalf Of Peter Laws via Sent: Sunday, February 2, 2025 7:47 PM To: [email protected] Subject: [g2-link] timeout ... ? timeout... no reply from g2_link ... I get the error above when I run this: ?" /root/g2_link/g2_lh -m "B" -o /var/www/html/fs.html -b "VE2RM" -r -t /root/g2_link/g2_lh.tpl VE2RM" manually ... which is likely why I don't see the status page. ? If you look at the index.html is is frameified as expected, but there is no ?/var/www/html/fs.html .? I touched one in case the program would rather append than create, but nothing. ? I see nothing in the logs that looks related ... ? I did remember to look at netstat to see what other ports needed to have holes poked and poked them (firewall at the edge - iptables is disabled). And yes, g2_link is running. ? ? ? [root@dstar-gw g2_link]# systemctl status g2_link ● g2_link.service - g2_link Service ?? ? Loaded: loaded (/etc/systemd/system/g2_link.service; enabled; preset: disabled) ?? ? Active: active (running) since Sun 2025-02-02 19:27:25 EST; 18min ago ?? Main PID: 1541 (g2_link) ? ? ? Tasks: 1 (limit: 48201) ?? ? Memory: 15.9M ? ? ? ? CPU: 2.367s ?? ? CGroup: /system.slice/g2_link.service ?? ? ? ? ? ? └─1541 /root/g2_link/g2_link /root/g2_link/g2_link.cfg ? Feb 02 19:27:25 dstar-gw systemd[1]: Started g2_link Service. -- Peter Laws \| VE[23]UWY / N5UWY \| plaws0 gmail com \| Travel by Train! -- Terry Stader - KA8SCP D-STAR Gateway & Reflector Admin ? -- Peter Laws \| VE[23]UWY / N5UWY \| plaws0 gmail com \| Travel by Train! -- Terry Stader - KA8SCP D-STAR Gateway & Reflector Admin -- Peter Laws \| VE[23]UWY / N5UWY \| plaws0 gmail com \| Travel by Train! -- Terry Stader - KA8SCP D-STAR Gateway & Reflector Admin <g3_icom_setup_doc.txt> -- Terry Stader - KA8SCP D-STAR Gateway & Reflector Admin -- Peter Laws \| VE[23]UWY / N5UWY \| plaws0 gmail com \| Travel by Train!

View All 19 Messages

#172

Join [email protected] to automatically receive all group messages.