Your checked your firewall settings to allow 30001 and 30051 UDP correct.
Are you actually trying to connect to XLX252 or did you use XRF252 or DCS252. g2_link should not recognize an XLXxxxy request.
Terry
Terry M Stader KA8SCP
WB1GOF Repeaters Proprietor?
toggle quoted message
Show quoted text
On Dec 9, 2024, at 12:40?PM, nigel spear via groups.io <nigelspear@...> wrote:
?
Ive followed the recent "recipe" for setting up G2-Link on an Almalinux G3 system.
It seems to be almost working, in that I can connect to an XLX reflector but after about a minute it unlinks automatically.
Timeout is currently set to 10 minutes (was previously no timeout), but either way, this what I see in the G2-link.log
Any clues as to where I should go next?
?
120924 at 16:44:59:sending link request from mod B to link with: [XLX252? ] mod A [45.77.227.69]
120924 at 16:44:59:Connected from: XLX252 ?
120924 at 16:45:02:sending File:[/root/g2_link/linked.dat], mod:[B], RADIO_ID=[LINKED XLX252 A ? ? ]
120924 at 16:45:03:finished sending File to mod:[B]
120924 at 16:45:50:Unlinked from [XLX252? ] mod A, TIMEOUT...
120924 at 16:45:53:sending File:[/root/g2_link/unlinked.dat], mod:[B], RADIO_ID=[UNLINKED TIMEOUT? ? ]
120924 at 16:45:54:finished sending File to mod:[B]
?
--
Terry Stader - KA8SCP
D-STAR Gateway & Reflector Admin
Terry M. Stader