Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Power connector for Z11?
|
Doug,
toggle quoted message
Show quoted text
According to my Z-11 Manual, the power connector is a 5.5 X 2.5 mm coaxial connector. I got mine at Radio Shack, but don't have access to the RS part number. Hope this helps, 72, Bill W4RK ----- Original Message -----
From: <n6tqs@...> To: <FT817@...> Sent: Sunday, June 03, 2001 3:24 PM Subject: [FT817] Power connector for Z11? Can someone tell me easily what power connector the Z11 uses?Questions ) see
|
|
I'm not sure what the spec is on that connecter, LDG supplies one with the
toggle quoted message
Show quoted text
Z11. However, unlike the one on the FT-817, it seems to be a very common size as I found I had a half dozen wall warts laying around (left over from some relic of the past) that all had the right connecter and all work just fine with the Z11. ---- 73, Rich - W3ZJ -----Original Message-----
From: n6tqs@... [mailto:n6tqs@...] Sent: Sunday, June 03, 2001 4:25 PM To: FT817@... Subject: [FT817] Power connector for Z11? Can someone tell me easily what power connector the Z11 uses? I'm building cables for my power supply system, and figured I'd to get a jump on it. 73, doug Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Julio
I just finished building the Z11 tuner kit. I checked the parts lists and the documentation and no where does it give the exact part size. I tried to measure the dimensions with a my caliper and came up with 5mm X 2.5mm which seems to be the same as one of the plugs listed in the Radio Shack catalog. I hope this helps.
toggle quoted message
Show quoted text
73's Julio ----- Original Message -----
From: n6tqs@... To: FT817@... Sent: Sunday, June 03, 2001 4:24 PM Subject: [FT817] Power connector for Z11? Can someone tell me easily what power connector the Z11 uses? I'm building cables for my power supply system, and figured I'd to get a jump on it. 73, doug Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Julio
After reading another post on this matter I did find the size of the pulg in the manual after all and it is stated at 5.5 X 2.5 mm.
toggle quoted message
Show quoted text
Julio ----- Original Message -----
From: Julio To: FT817@... Sent: Sunday, June 03, 2001 6:21 PM Subject: Re: [FT817] Power connector for Z11? I just finished building the Z11 tuner kit. I checked the parts lists and the documentation and no where does it give the exact part size. I tried to measure the dimensions with a my caliper and came up with 5mm X 2.5mm which seems to be the same as one of the plugs listed in the Radio Shack catalog. I hope this helps. 73's Julio ----- Original Message ----- From: n6tqs@... To: FT817@... Sent: Sunday, June 03, 2001 4:24 PM Subject: [FT817] Power connector for Z11? Can someone tell me easily what power connector the Z11 uses? I'm building cables for my power supply system, and figured I'd to get a jump on it. 73, doug Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Brian B. Riley, N1BQ
5.5x2.5 mm
toggle quoted message
Show quoted text
-----Original Message----- |
to navigate to use esc to dismiss