¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

No output on HF.


 

Greetings,
?
Subject line says it all.?
I have output on vhf but no output on HF in any mode.?
Trying to remember if I read about someone else having the same trouble recently.?
Any input appreciated.?

Thanks,
Mike
NQ7K
?


 

Hi you say you have output on VHF,
How much power output do you have ,
Often only one of the finals go bad so you still have low output on VHF/UHF,
So yes I think the final board is bad,
Good luck
Keep us posted,
Dave 2E0DMB


On Wed, 2 Oct 2024, 20:59 NQ7K-Michael via , <nq7k=[email protected]> wrote:
Greetings,
?
Subject line says it all.?
I have output on vhf but no output on HF in any mode.?
Trying to remember if I read about someone else having the same trouble recently.?
Any input appreciated.?

Thanks,
Mike
NQ7K
?


Kurt Savegnago
 

I whacked my 817ND when the antenna tuner didn't kick in right on HF.? Had to send it back to a Yaesu repair station to the tune of $200.00 plus shipping.? That was a lonnnnnngggg time ago too!? Probably a lot more $$$$$ now.? I was stupid and ran mine through an RM Italy amp when it was apparent I couldn't get out. I missed the tuning protocol on the antenna tuner I had inline one time and whacked the output transistors on the 817ND!

I'm afraid it's going to cost you some $$$$$.? I researched doing it myself and it was too complex.? Sent it back to a Yaesu service center and they replaced the HF output transistors that were dorked and re-aligned the rig.
I suggest you do the same if you want to use it on HF.

Was worth every penny as I was able to run it (and still can) without issue.? I had custom filters installed from an outside provider just after I got it (now out of business) and that darned thing was so quiet as far as noise was concerned.? It almost cost as much to get the conversion done as I paid for the unit originally but well worth it to me back then.

I need to throw a long wire inverted L into the trees again.? I have a 10 foot copper coated ground stake to feed against.? The horizontal of the inverted L was facing southwest but I had a blast talking to operators in Tahiti when conditions were right putting out 300 watts through the amp with the 817ND.

I usually run it VHF and UHF now with a screw in antenna without an amp on 5 watts so that is a harmless way to run it.

I'm afraid if you want to get it fixed, you'll either have to spend the money or be satisfied with running VHF/UHF only.

I bought my ND a long time ago and dorked it shortly thereafter.? Spent the money to get it fixed as I researched doing it myself but it was too much of a hassle.? Wished I had better news for you but
"That's the way it is!"

I bought an FT-851D when I didn't want to mess with an amp and run 100 watts.? I could plug it into the RM Italy amp and get 300 watts (supposedly) out but I dialed down the output on the FT-851D to 5 watts to do
that trick.

Kurt KC9LDH
P.S.? Wished I had better news for you but if you want to get the unit back up on HF, you'll have to spend some money.? Back in the day, I researched doing it myself and it was too involved.

On Wednesday, October 2, 2024 at 02:59:39 PM CDT, NQ7K-Michael <nq7k@...> wrote:


Greetings,
?
Subject line says it all.?
I have output on vhf but no output on HF in any mode.?
Trying to remember if I read about someone else having the same trouble recently.?
Any input appreciated.?

Thanks,
Mike
NQ7K
?


 

¿ªÔÆÌåÓý

Hi Mike,

?

I have to ask the obvious question first!

?

Are you connected to the correct antenna socket. If you are connected to the rear (SO239) one then there will be an ¡®R¡¯ on the display after the frequency. If you are on the front (BNC) then there will be no ¡®R¡¯.

?

73¡­.Eric VK2VE.

?

From: [email protected] <[email protected]> On Behalf Of NQ7K-Michael
Sent: Thursday, 3 October 2024 04:30
To: [email protected]
Subject: [ft817] No output on HF.

?

Greetings,

?

Subject line says it all.?
I have output on vhf but no output on HF in any mode.?
Trying to remember if I read about someone else having the same trouble recently.?
Any input appreciated.?

Thanks,

Mike

NQ7K

?


Virus-free.