Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Display Flashes
|
When turning rig on display flashes on and off. I turned rig off and
on several times and that time it fixed the problem. I have not had this problem to occur now in several days. Rig is about 6 months old. I use International Power Supply and no internal batteries. Power supply is putting out 12.4 volts, I have the 12 volt one, and don't believe the power supply was causing the problem. I believe I read someone else had this problem, but I can't find the message. Any ideas what might be causing this or what to do if it happens again? I would guess a processor reset might fix it if it happened again. I can't find anything in the service manual or owners manual that seems to address this problem. Thanks, Reed W4JZ |
|
Ian Whitelaw
Reed,
toggle quoted message
Show quoted text
I also have noticed the display flashing when the 817 is plugged into external supply, I am running the rig from a SLA gel cell. It also takes several attempts of switching the rig off and on before the problem clears. I cannot find any reference in the manual as to what it means. I look forward to any suggestions / explainations Ian, VK2ZCD On Thu, 31 May 2001 W4JZ@... wrote:
When turning rig on display flashes on and off. I turned rig off and |
to navigate to use esc to dismiss