When turning rig on display flashes on and off. I turned rig off and
on several times and that time it fixed the problem. I have not had
this problem to occur now in several days. Rig is about 6 months old.
I use International Power Supply and no internal batteries. Power
supply is putting out 12.4 volts, I have the 12 volt one, and don't
believe the power supply was causing the problem.
I believe I read someone else had this problem, but I can't find the
message.
Any ideas what might be causing this or what to do if it happens
again? I would guess a processor reset might fix it if it happened
again. I can't find anything in the service manual or owners manual
that seems to address this problem.
Thanks,
Reed W4JZ
