开云体育

Maybe an 819 with avalible parts, just like they did with the 818. Mick SA4MDN

If I am reading the tea leaves properly, they have sufficient repair parts, for now anyway, but not enough for manufacturing any more of either radios. Ken, N2VIP

I guess that means that I need to get my finals replaced pronto Sent: Wednesday, December 28, 2022 8:12 PM To: [email protected] Subject: Re: [ft817] Yaesu FT-818ND Discontinued Manufacturing

This very likely means that Yaesu does not have a replacement radio for either, since this wasn't really planned, and that's a shame. It will be interesting to see if they: - resume production of

It's true: Yaesu Update Dec 28th, 2022 - End of Production FTM-400 series and FT-818 series youtu.be Ken, N2VIP

It's also posted on the Yaesu US YouTube channel. So no joke Bork Bork Bork.

Although it's pretty possible, and sweden's april's fools is April 1st, don't forget that today is "that day" among many countries of hispanic tradition. I'd wait a few days for

This was posted on FB by a dealer in Sweden. Reed? W4JZ

Hi Ed, I have similar Problems and I started a thread here: /g/ldgelectronics/topic/95909285#912 You may want to subscribe to that as well. Cheers Thomas -DD1TA

I assume you have connected the keyer paddle correctly to the 1/4" plug, tip and center ring to dit dah on the paddle and ground ring as common/ground. Put the rig in CW mode. Page 30 in my

*Hey Mark. Got the 817 going this morning. Now I have rig and tx control.*

I apologize.? I didnt know if I was allowed. Only selling,? because I need the money to move.? Kaysville, UT. $565 with tuner,? and buyer pays shipping.

Hi Pat could you please give the members some more info, like Country, location and price of the kit. Thanks Martyn Admin.

Tnx Mark I will give it a try today. I will get back if any problems.

Tnx I will give a try. Appreciate your reply.

Selling my 817nd, with LDZ-817 tuner. Good working order. Please contact me off list.

Dave, as Mark stated already check these items… Insert three conductor jack with paddle Set mode to CW Set BK to On Set KYR to On More info in manual on page 27. Petr

And you want to set the FT-817 for break-in keying.? Thus when you touch the paddle levers, the radio will automatically go into transmit. Take care, Mark AA3K

Dave: Have you checked the function key menu items to verify that you've got the FT-817 set correctly?? These's a setting to go from iambic (or paddle) keying, to "straight" keying.? I don't have

*I am trying to hook up my 817 for cw. I have a Vibrplex Iambic keyer. It has a 1/4 in stereo plug reduced to a 1/8 in stereo plug. But I can't seem to tx on cw. I have tried a electronic keyer plug