开云体育

Hmmm, an FT-100D or an IC-706 mkIIG? ;-) The Mirage amps come in at least a couple of VHF/UHF models and are pretty reasonably priced. At some point, it's probable that we have to recognize the limits

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the FT817 group. File : /ATX Counterpoise Lengths.txt Uploaded by : g4ilo@...

I Hi Julian, Well this was not my idea as I mentioned, but it is a fantaastic idea and one does not need to carry loads of wires with his/her FT-817. In fact I have made 3 sets of radial/counterpoise

Thanks for this posting, Demetre. I had been going to do a similar thing, based on the counterpoise lengths I came up with, except that I had been going to make the joins at the length for each band,

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the FT817 group. File : /Antennas/CounterpoiseKit/CounterpoiseKit.jpg Uploaded by :

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the FT817 group. File : /Antennas/CounterpoiseKit/CountepoiseKit.txt Uploaded by :

Hi guys and gals, Here is a nice article that Dale, W8ABZ sent me and I got permission to upload it here at the HFpack group or other groups so that others may benefit by it. This kit is made of 6

Does anyone know of an amp that would cover HF/6m/2m/70cm and cover all modes? The THP HL-50B seems reasonably priced for what it gives you. But the HL-726D, which cover 2m/70cm all mode, seems to be

And now - Monday evening - got an updated version from RT systems in my e-mail, installed it, and the program is now able to send data to the radio. RT systems responded very quickly even though this

Try programming it in the radio by hand then exporting it to see what it thinks that it's supposed to look like.

surface - but display same "3 with 3 this mention Hi Bob, Welcome to the 817 owners! When using external power, the icon does not show (blank) for 5 W level. BTW, this is covered in the FAQ ( see 3rd

Please read the FAQ under TOPIC - GREEN WIRE. The FAQ section of the FT817 Group is always a good place to start looking for answers. 73 de Barry - W4WB

I just got my FT-817 last week so have barely scratched the surface - but I'm puzzled by one thing: According to the manual, the power level display changes the number of "bars", with 3 "bars" for 2.5

Norm, Thank you for the response, you are the first person to tell me why the green wire has to be cut. Many Thanks John DATE

RT Systems had told me this was available at the Dayton Hamfest. When I inquired about it at "the Ham Station" they had to look around a while before they found it. When they did, it couldn't be

I dint cut the green wire It works fine why are people cuting the green wire

Ok, I got the patch and now I can save and upload files to and from the FT-817 using this software. I am trying to program a 2m repeater with an odd offset (Not 600) and although I am able to get the

Approximately (varies by band), 45w max before and 60w after. 73 John Newell KB1FPM

pgerhardt@... writes: Where can I buy one ? Lee/k3re

The green wire needs to be cut if you are using rechargeable batteries. The green wire is there to prevent an alkaline battery from being accidentally charged. Norm Wesler K2YEW