开云体育

Hi Steve, The issue I'm having seems to be different, but close attention to your reply makes me wanting to expend some euros on a dummy load for further debug this. Meanwhile, I also engaged with

Hi, gang... well the subject says it all. I'm looking for the little coaxial power jack for the 718. I've searched Amazon and eBay. I don't want to spend $25 for a connector with a hunk of wire on

Hi Anaxi, I replied twice but the web page kept freezing towards the end of an extended post and I lost heart! It happens as soon as the radio is turned on. Connect mic only- all OK. Connect key

Any contact from a POTA park counts as a POTA contact.? POTA has no required exchange.? Whether you are doing POTA or FOBB just upload everything to the POTA web site. -- Mark AA3K

I’m still seeing such behavior on the IC-705 (different radio)... when on SSB/voice, randomly, when I press the PTT, I see the TX light on the amp, but as soon I say something the TX light turns off

*Flight of the Bumblebees is now just 1 Week Away. July 28 th is nearly here. 21JUL24* Bumblebee Number requests are still coming in. As of this morning, there are 166 Bumblebees signed up to go out

Hi Steve, Long time since no groups.io-thread-interaction ? That is a bummer... How often do you face this? Any clue of the scenarios (temp, uptime...) when it happens? Excellent tip, I'll try

Strange behaviour but it is familiar to me with my '818 and has been a nagging issue for several years, commencing about one month after the warranty expired. I key the supplied Yaesu mic. and the RF

Priced reduced to $15 + shipping which should be around $15.00 or so…

Hi, Just got this amplifier, the version with band sensing, and their cable kit for FT-817. Working conditions: - Yaesu FT-818nd (TX) -> Neptune 50W (AMP) -> Diamond SX600 (EXT. METER) ->

Based on some questions that ?I have received, I have added the following to the FOBB Rules on https://ars-qrp.com ( https://ard-qrp.com ) *POTA/SOTA OPERATIONS AND HIGHER POWERED

Switched to normal decode and sync'd the time. It seems to be good for now.

*Flight of the Bumblebees is 2 Weeks Away. July 28 th will soon be here.* Bumblebee Number requests are still coming in. As of today, there are 120 Bumblebees signed up to go out and operate portable

I'm testing right now with WSJT-X. Set up for FT8 and works OK. Clicked the FT4 button and it switches to that mode and decodes OK.

It started working suddenly and then stopped after I shut down. It seems to be a software issue. JSTX gave me the insight, when I got an error "partial data loss", that W-SJTX did not. I set decode to

I assume you have the correct frequency for FT4 transmissions and that the radio is set for USB? If FT8 works, FT4 should also work. Disable the CW filter if you have one enabled. Give us a few more

Can you clarify "does not work"? Doesn't transmit? Doesn't receive? Doesn't decode? I have never tried FT4 with my FT-817. I'll try to check it out today and see if there is any difference from

Sorry, that should have been menus, not memories – senior’s moment! 73….Eric VK2VE. Sent: Sunday, July 14, 2024 7:47 AM To: [email protected] Subject: Re: [ft817] FT8 works FT4 Does

Hi Marc, Go to menu 1 and turn it on. That will allow all memories to accessed. 73….Eric VK2VE. Sent: Saturday, July 13, 2024 10:03 PM To: [email protected] Subject: [ft817] FT8 works FT4

Hello, I am new to digital HF. I am using an early FT-817 with W-SJTX or JSTX and experience the same issue, that has me stumped. I am able to use FT8 without any issue, but FT4 just does not work. I