开云体育

Hi All New firmware version V1.3 is already working in Maxicom CAT display for FT8xx transceivers A new IF for 28MHz transverter was added. This video shows Maxicom used in FT8 with FT857 and MET-4

Many quote the maximum output at solar noon, midsummer, clear sky and the panel angled at the sun. Obviously this can be even x10 the actual output even on a good day in the other half of the year

I saw the same thing. Various manufacturers with dubious claims. I think it probably cost more, but I bought a small folding bioenno panel and haven’t regretted it. Dan -- . Please pardon any

Bioenno has been solid with their support for batteries and panels. I have 5-6 batteries and 3 panels 28W-180W. Buy quality. Doug W4DBL Doug Lynch President Aries International, LLC D:

Hi all, I'm considering a solar panel purchase for portable qrp. Something in the neighborhood of 20-30 watts. Many on the web have sketchy, ambiguous, or contradictory specs. Any guidance would be

I'm using a DigiPi with a digirig going to the 817. Running WSJT-X. I have checked "CAT" for PTT Method. "Test CAT" works and comes back green, but then "Test PTT" produces an error (see attached

Might be of interest. https://w2eny.com/Handset/ B

All, Is anyone using an H-250 military handset with their FT-817 ? Perhaps in a field pack configuration ?? ?If so, I have a bunch of questions; How did you interconnect? the handset to the

I was about to suggest flrig and on a re-read

Thanks All, i will add two more cells to the pack and look into the LDDA batteries. I have 10 eneloops so good for the moment All advice much appreciated cheers Tony

I use LADDA cells too. They work well. -- Mike G8GYW

Hi guys , I already talked (a few years ago) about the LADDA 2450 mA from IKEA are also a good choice and cheaper than the eneloop. Still ok after 4 years of use. just took care about the

Your NiMh pack will work well. It's obviously limited by the capacity and quality of the cells but, for the length of time you're intending to operate, they'll be absolutely fine. The radio will

There should be no real difference between the NiMh Enloops and the 817 battery pack other than voltage.? The NiMh batteries have a very low internal resistance and thereby can have a very high

Tony, I think the shortcoming of this solution may be the voltage and discharge current rate. Your battery pack will probably provide similar power to the original NiMh pack, which means you will be

OK my thanks to Paul and Dave for their comments. This has been a bit of a tour of the FT-817ND radio. So as I explored: - on LSB digital modes the filter was centered at 2000 Hz - on USB digital

Thanks for the clarification, I was wondering about the noise implications. That helps, cheers Tony

Brilliant Thank you very much Andy

Just thought I would clarify. He is not using a power supply as you are referring to. If you read his question more thoroughly, he is referring to his Battery Pack as a external power supply. I have

Hello, here are the dimensions of the spring. Regards A.B.A Tecnhologies verizon.net@groups.io> a écrit :