开云体育

Hello all, Thank you very much for all your replies and suggestions as to the issue and remedies. My 817 is an ND but may well not have been upgraded to go higher in the band. I shall try a reset as

Hi there, I think the first thing I would do is a full reset, just in case it's an odd setting change or glitch that's causing this. I can't remember the button presses to achieve this? but it's in

If it is a non ND model and not from Japan? this should help! https://ham-radio.ca/pages/radio-equipment/ft-817.php -- . . . . 73 . . . Ken - VE5KC https://amateur-radio.ca

Google with ft-817 wideband mod should bring back videos that will help. Dave G0CER

Paul, the limitation to 7.1 MHz makes it seem as if you have an 817, non-ND. The 40m band was extended up to 7.2 MHz back in 2003 (WRC-03.) IIRC—my memory may be wrong on this—early FT-817s did

I'm actually very familiar with N1MM.? Again, how do you interface the keying from N3FJP?? The 817 can't take ASCII text like some other transceivers so you need some sort of interface like a simple

(7747) Yaesu FT817 / FT817ND Full TX Modification - YouTube ( https://www.youtube.com/watch?v=VCNIyuTF2G4 )

Hi Paul is the Radio a ND model , none ND models can be wide banded using software, The ND can not, also you need to do a reset on the radio when you have done the mod, if you are not comfortable with

/g/ft817/files/Mods/ft817allfreqs.jpg This link shows the tracks you need to solder for full bands unlock Dave 2E0DMB

Hi Paul There is not a firmware update, you need to open up your radio and remove the front panel, and there is a line of solder pads, you then have to link/unlink the correct pads for the frequency

Hi different region where the 40m band only goes to 7.1 MHz." ....my guess also The UK 40m WAS once 7.0 to 7.1, it is now 7.0 to 7.2... so your 817 might predate the change. 73 John G8EWG >

Do you have a Japanese market version? If the bottom label has “JARD” on it, it is limited to the JA allocation. You may be able to go slightly higher in a SSB mode, but the JA allocation ends at

Hi Paul, Welcome to Amateur Radio. Did you buy the radio new in the UK or did you get it second hand? My guess is that you got it second hand and it is set up for a different region where the

Hi all, I’m after some help with my 817ND please. I recently passed my Foundation licence and ready to transmit now. I am using an ATU/SWR meter and have a number of band settings sussed out. Last

I gave up on it Mark. Thanks for asking. I can use N3JFP contest programs with no problem. N1MM does not like my 817 cw. I used the same settings as N3FJP but did no work. I also disabled the internal

Hi i have Just fitted a New Main VFO Encoder? RES20D-50-201-1 i got it from RS Components Part Number, 202-4410, uk price is ?25.09 inc vat + p&p RES20D-50-201-1 | Nidec Components 5V dc 50 Pulse

How are you connecting N1MM to the 817 for CW? But a quick thing to check is that you have the 817's built in keyer turned off. -- Mark AA3K

I am trying to set up my 817 with N1MM. I have rig control working but no transmit, For Rig Control I use COM5 38.4 baud 8N2 RTS. For cw I have com 3 dtr. When I try cw the rig locks in transmit, Any

Hi, I’ll take it if it’s not already claimed. Let me know. Thanks -Steve

Good afternoon to the group, I have for sale a W4RT one big punch kit for the Yaesu ft817 family of radios using the supplied MH31 microphone. This provides speech processing that is missing from