开云体育

Hi guys: Before I send my radio off to Yaesu, I thought I'd run the problem by the group. My radio shows running all modes on each of the top buttons. In other words, instead on selecting the

I used a similar connector (forget where I got it) and simply didn't push the outer cover all the way up to the end. Ran some tape around the outside to keep it from moving, and it's worked

Does anyone have a preferred source for plugs, or for plugs with integrated shielded cables, to fit the ACC and DATA jacks on the FT-818? I discovered on Friday that the plugs sold by the local

Capt, Did you ever solve yoiur sailboat proplem... I owned a Hunter 25.5 for a while and wanted to operate on the Great Salt Lake.... living in Ogden, Ut. Sold the boat before I could play radio on

Announcing W6SFM's BUG ROUNDUP The Samuel F. Morse Amateur Radio Club, a Sacramento, California based CW enthusiast club wanted a special time to bring bug operators together on the air. In the

Announcing W6SFM's BUG ROUNDUP The Samuel F. Morse Amateur Radio Club, a Sacramento, California based CW enthusiast club wanted a special time to bring bug operators together on the air. In the

Yup – EASY………….. Sent: Friday, May 3, 2019 7:12 AM To: FT817@... Subject: Re: [FT817] Re: FS: NEW LNR MTR5B Mountain Topper Can someone tell, how is this advertisement

Can someone tell, how is this advertisement related to the Yaesu FT-817? J. Rivera WP4JBG

Hi all, A number of you who own our Kx33 power supply asked us for this adapter for use with the stock Yaesu charger, so we are now stocking a 4.0mm x 1.7mm female DC power jack to Anderson PowerPole

I know. It is for the MFJ power supply and similar. Randy ka4nma -- Declare His glory among the nations, His marvelous deeds among all peoples (1 Chronicles 16:24)

Hi Randy: Nice find! ? However, the barrel connector is not the size for the FT-817. ? Works with many other rigs, however. 73 de RayK2ULR

For the hose that have a mfj-4103 power supply, I have found this 2,1mm x 5mmplug to power pole http://www.westmountainradio.com/product_info.php?products_id=ppl-21 Randy ka4nma

FYI HobbyPCB makes low-cost filters for the 144, 220 and 440MHz bands. They aren't anywhere near as high performance as the OCI cavity filters but they are only $20 each, handle 10W, have low

The FT817 Group averages over 500 (+/-130 one-sigma) messages per month. Because the volume of messages is rather large, I would like to remind everyone of a few long-standing FT817 guidelines

This is interesting. I’ve often said YAESU should not make the new FT-817 (now FT-818 I guess) into another scanner. We don’t need a worked all pagers award. What we need is tight filtering for

I had my FT-818 running for a couple of hours on CW/SSB in the 432 MHz Spring Sprint recently. I was portable in a hilltop park with an 11 element horizontally polarized Yagi. All went fine, but I

Hello,new to the group. I'm considering purchase of the FT-818ND, would like to know what kind of battery life current users are experiencing. Thank you, 73, Richard AG5M

Hi, I'm considering purchase of a FT-818ND but have someconcerns about the UHF performance of the 818 compared to the 817 and would begrateful if anyone has experience of the 818 70cms performance,

Thanks, Eric. Assuming the menu is the same in the FT-818 as in the FT-817, it appears that the parameters available there are for the sensitivity of the power foldback (high SWR protection) to the

Hi, I'm considering purchase of an FT-818 but have some potential concerns over the capability of the new 70cms RF filter design in the 818 vs the 817. The 817 had a 3 section helical filter