开云体育

I didn't even know there was an official Yaesu case for the 817. But if there was, it would probably cost five times what I just paid. If I was going to pay serious money for a case I'd want one

Hi Tony, I maybe wrong, but.. 1. The FT817 was originally only designed for Japan. I don't think they have NOAA Wx.? 2. NOAA Wx Tx's are North America only.? Best Rgds David

sounds like the same catch 22 works for gun laws..... only the bad guys have the big guns! Same here, only the bad guys have the Big Gun amps.... any truck stop can sell ya one boys! I will look

I got the real case from a MFJ dealer in the flea market at Dayton for $19. It's very well made. Leather, with all the right holes.... I tried to get something from Western Case Co in CA but they

I never would trash this lovely little radio, but my initial reaction to working with it was incredulity that someone would design a perfect rig for backpacking in wilderness areas and leave out the

Using defective software? Thanks Pres Waterman W2PW c/o Patchogue Motors, Inc. Long Island Ford and Kia dealer GO BILLS!

Tom and group, Actually it's not that simple. Neither the TX nor RX current figures are constant. In many situations, the RX current actually is higher than the TX current. If you are listening to

Paul and group , Sorry, but it's not that simple... but not hard either, just a little more math. First , you have to assume yr radio usage. A good fiq to start with is a 4:1 ratio of listening to

I've also sent this to RT for help, but curious if anyone else has had this problem. Help! We have here a clear case of operator stupidity, software problems, radio problems, or a combo of one or

I think this is illegal, per FCC. A radio has to load an amp with a minimum of 50 watts. Its a rule that came out, if I remember right, in the 1970's so that CB linears would be harder to come

Hello YLs and OMs, does anyone of you know what the "TX INH" at the ACC-Plug means (see page 5 of operating manual). In case it means TX inhibit (= mute?), do I need to put it to ground to prevent

Thanks Tom. That helps alot. Paul

I have an Icom 706 that could use a filter but have nothing to swap except maybe some cash. Let me know if you are interested in selling the 500hz filter. Paul K3PG Message: 4 Date: Wed, 23 May

Paul: Sort of, but not really. Since the load the radio will place on the battery will be variable depending on how much you transmit and receive, that alone will make it difficult to figure out.

Hi Jeffrey, The applicable rules are 97.315 and 97.317 plus a few referred rules. In short, 97.317 says that an EXTERNAL RF HF amp must require NLT 50 W drive to produce its full rated output.

Hi, I picked up the MAHA MH-FNB-72 for the FT-817 at Dayton and would like to post a question that I didn't see in the literature that came with it. Previous posts sugest to fuse the battery, and

I thought it was clear that what I am trying to do is find the settings and counterpoise/ground plane that will enable the MP-1 to be repeatably set up in a portable location without requiring the

How do you figure out how long a 817 will run on a 12 volt 7.2 AH SLA battery? Is it just a matter of converting the 7.2 AH battery rating into milliamps and then dividing that by the max milliamp

How do you figure out how long a 817 will run on a 12 volt 7.2 AH SLA battery? Is it just a matter of converting the 7.2 AH battery rating into milliamps and then dividing that by the max milliamp

Michael Dirska, DL1BFF pointed out that using Menu#26 USER-U instead of PSK-U solved the problem of a frequency offset when using the 500 Hz filter on PSK31. Now here is another hint. If you use