开云体育

When in the home QTH, I keep the stock chager connected, and run at 5 watts. In the off-time, then the trickle charge feature keeps it fully charged. If I am really using the radio heavily, then I

I would like to share the information that HRO http://www.hamradio.com/ is offering the AlexLoop for a special price on the website and for prompt delivery on the HRO stores. - For those

Hi Folks, I've been trying to add a digital audio filter to my FT-817 by routing the signal out from one pad on C1338, through the DSP daughterboard, then back in through the other pad on the same

Some battery basics.... Charging NiCd or NiMh cells is pretty straighforward. For a standard "slow charge" of all cells in series without any end of charge detection (ie., the way the FT817 does

When battery charging is not selected, or has finished, the radio trickle charges that battery whenever power is supplied. The rate will depend on battery state and supply voltage, but around a week

Hi Since the original battery for the 817 was I think a 1400 mAh battery I would choose the 10 hour charge time for the first charge cycle, then depending on how deeply it is discharged maybe the 8

After about an hour of searching... I found something on a fellow's website that indicates the internal charging circuit was about 180mA. Simple math not taking into account anything else was that 10

Oops, spell check got me. It is 1650mAh

Hello Frank, Probably weeks to charge that battery. 73 Ken g8beq

Hi Frank, I doubt your battery is 1650AH capacity. I suspect it is 1650mAh.? ie 1.650Ah.??Cheers, ? Owen? VK6YBA

I just received a new 1650Ah battery and looked (quickly) through the manual for some sort of cross-reference on the charging. I see three levels for charge, 6, 8 & 10 hours. For a 1650Ah

Jeffrey, Look into the tools offered at http://www.pignology.net <http://www.pignology.net> I use "HamLog" with my macbook laptops to control my rigs with a cable. However, he also has a serial to

Hi Tim, Any Android or Windows tablet support Serial over Bluetooth, even newer ones (based on Bluetooth 4, but backward compatible with Bluetooth 2 and 3). None of the iPads, even the older ones

Does anyone know what tablets support Bluetooth Serial protocol. My understanding is a newer standard that may keep some older tablets from being used. My goal is to use a small tablet for

As I'm aware, iPad does not support Bluetooth serial protocol, so you cannot use it for CAT over Bluetooth. -- 73 Dan YO3GGX https://www.yo3ggx.ro

Hello Jeff, I agree I wish there were more apps on the iPad for control and digital modes. I also know there are plenty on androids. The best I have are from wolphi.com. Too bad no one has done

I use groups with my FT817 for repeaters to cover different areas. The groups are 20 memories per group. To use groups you need to select groups in menu # 34. If you turn off groups the memories

I have seen there is Android apps for the 817. And I already have the blue tooth adaptor for it. But I do not know of the software or appplication to be able to use my iPad Air 2mvia Bluetooth fr

I would be interested in hearing how members are using the 817nds memory and group categories. I understand that you have 10 groups and each group can hold 20 memories. As part of my planning I

Good point, thanks.