开云体育

G’day Ulf, You mention that you’re running from a lead acid battery, is there a charger connected to it and running? Steve VK2ARS Sent: Tuesday, January 24, 2023 12:26 AM To: [email protected]

Ulf, CW is generated by unbalancing a double-balanced mixer. Presumably the hum is FM, rather than AM—are you able to check with an oscilloscope or similar (an auxiliary SDR, for instance?) Two

Thanks for your reply Al. I don't think the problem is audio related because it's present in the in transmitted CW carrier. As far as I know the TX CW is not audio generated in the 817. I will try an

Thanks Dave! I'm trying to connect ISS with a software modem (as I do with all digital mode, packet included) and my cable works on audio rear input. What does "packet cable" mean? This is the info

Well Pietro . Do u have the 817 packet cable? I have one that I will never use. I don't have a use for it. Would rather not advertise here.You can e-mail direct at dwtucker19@... if you need

The audio circuits are sensitive to fields near the radio.? Do you have any transformer operated devices near the radio.? Is there line voltage cables running next to the radio, etc.?? Does the hum

Hello I'm new to this group so excuse me if this topic have been up to discussion earler. I have a strong hum in my 817 TX and RX. It's very noticable on the transmitted CW carrier and it sounds like

Dear Dave, also I worked iss in FM and signal is very strong. I worked others satellites, too, with 5 W. I never had more then 10 W in my life (since 1974...) And I'm sure that power is never a

Yes if you look on the AMSAT or the ISS amateur radio page it will have a schedule of what is active and when John Earnshaw M0JFE aka Beanpole or 26TM915 Tel:- 07940815659 “Ride the waves and make

Well Pietro I never connected to packet but I have worked the ISS on low power 5 watts worked great. I also used the LOS sat's cross band 2/440 before. Could not believe I work the sat's on 5 watts.

Has anyone had experience with packet QSOs on the ISS? I work on the ISS in FM but I can't connect in packet mode. I use UISS software with UZ7HO soundmodem. I solved the PTT problem, but I decrypt

Hi A 817ND with first digit a 1 would be 2011 an original 817 with a 1 would be 2001. I have one of the latter. Marty kd8bj

The 1 indicates the fourth digit of the serial number, so 2001, 2011, or 2021 are the possibilities. The FT-817 was released about 2000. The FT-817nd was released in 2004. The FT-818 was released in

It's an FT817ND. Zack W9SZ

Either 2001 or 2011, if I read the magic decoder properly... The model number may help you narrow it down better, certain models were offered in certain years... Ken, N2VIP

WHat would be the full year it was made? Mine starts with 1N... 73, Zack W9SZ [email protected]> wrote:

Hi David - Many thanks for this - Ive worked it out 2015! 73 Kev [email protected]> wrote:

Hi Kev, Mike, N1EVH posted this information to the list: ----- Yaesu's serial number scheme is as follows... 1st digit is the year it was made. 2nd digit is the month it was made 3rd and 4th digits

Hi all - Ive just bought a Yaesu FT817ND and I wanted to know how you can determine from the serial number how old it is?