开云体育

On my '817 it was the SMT solder joint at the back of the connector that cracked, which made it intermittent. The only other thing actually in series with the external power, which is not in the

Seeking help from the brain trust, thanks. Rig not getting power thru rear connector, runs ok on battery. Have tried multiple plugs, cables, power sources, etc. Port is clear (no fragment of plug

Happy to help. 73 [email protected]> ha scritto:

Many thanks Pietro. You were right. Menu 39 DIGI MIC setting. Best 73 Ivor G4RJA Ivor

Hi Pietro I’m using Signalink USB

If you have audio in the headset there is no audio in the rear connector (data output). What are you using to catch the audio from radio to PC? Pietro (via Tablet) [email protected]> ha

Yes Pietro via the headphones

Ivor, do you hear the sound coming fro the radio? I2OIM <g4rja@...> ha scritto:

Hi Pietro Apologies for spell checker mistyping your name! I've checked my settings, but problem remains! Settings are: Baud 38400 Data bits default Stop bit one Handshake none PTT method DTR Mode

Thanks Pierrot. I’ll check on that. Ciao es 73 Ivor G4RJA

Pay attention where you are getting audio: dig mode has output on the rear (data) connector, cw mode to the headset... And also, if you hear the audio, may be that your PC is working from the

Using ft817nd via signalink on ft8. No problem until fairly recently Now - can't hear ft8 signals in DIG mode, but if I switch mode to CW, they are on the waterfall and decoding. Have uninstalled and

How did this talentcell power pack work out for your 817? ?I'm also thinking of getting one ...

Indeed, Brian, I'll not cavil with that sentiment. I'll not deny that I have gone on record somewhat witheringly regarding a number of the attributes and foibles that I felt Yaesu should have

"Steve" <g4vrr57@...> wrote:

Follow up and (hopefully) resolution. I telephoned the UK retailer from whom I bought the radio (Waters &Stanton) and the person I spoke to immediately focused upon supply voltage. Although I thought

I omitted to mention that in order to exclude TRX relay sticking issue(s) due to the lack of regular use, I set it up with a paddle and a dummy load together with an appropriate TRX delay and made

Good morning / afternoon / evening everyone. I have a problem that reared its ugly head just outside of the Yaesu warranty period of three years. Forgive me but it's an FT818nd as opposed to what this

Maybe to clearify due to language or translation problems: The PCB needs to be build-up by your own. All parts are in. But need to be soldered on the PCB. So my description "nearly ready-to-go" might

Hi Martin, on www.box73.de ( http://www.box73.de ) there's a nearly ready-to-go PCB, especially designed to be build into the MH-31 microphone. This is exactly what you're looking for.