I am not familiar with the MFJ unit, but the DK9SQ mast, which I own, has a
reinforcement ring at the ends of the larger diameter sections. The smaller
diameter sections appear to be of uniform thickness, although tapered.
These reinforcement rings also have a nice feature in that they fill the
circumferential voids in the collapsed condition so the sections do not
rattle around as much as they would otherwise. This is a well-executed mast
and very convenient to work with.
73,
Bill
W4RK
Nashville, TN
USA
toggle quoted message
Show quoted text
----- Original Message -----
From: <n1eu@...>
To: <FT817@...>
Sent: Wednesday, June 06, 2001 11:31 AM
Subject: [FT817] Re: Fiberglass Pole
--- In FT817@y..., "Steve Howell" <AB8JC@y...> wrote:
Does anyone know if there are any differences between the MFJ
pole
and the and the one being sold by DK9SQ.
No difference that I could see at Dayton. The gent who does Kanga
&
Hands kits in the US also carries the pole. I don't know about
prices.
I suspect that the joints in the DK9SQ might have been strengthened
compared to the MFJ, but perhaps someone could confirm . . .
73,
Barry N1EU
To unsubscribe from this group, send an email to:
FT817-unsubscribe@... and for a great FAQ ( Frequently Asked
Questions ) see
Your use of Yahoo! Groups is subject to
