Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Re: amplifier
Well, I can tell you, because I have tried it, that my Ten-Tec Hercules II
toggle quoted message
Show quoted text
solid state linear will produce about 150 watts output when driven by the FT-817. So far I have used it only once to snag one DX QSO in a heavy pile up on 20 SSB. Much to my own surprise, 5 watts is usually more than sufficient and I have made a few DX QSO's at 500MW! I never thought I would be a QRP'er but the FT-817 has turned my head :-) The specs say that the Herc II requires 50 watts for full output, but in fact it's less. 35-40 (depending on the band) watts runs it full tilt at about 550 watts output. Given the 50 watt minimum rule, I'm not sure how Ten-Tec got away with that. Maybe because it's not a 1500 watt linear? ---- 73, Rich - W3ZJ -----Original Message-----
From: w4wb@... [mailto:w4wb@...] Sent: Thursday, May 24, 2001 7:42 AM To: FT817@... Subject: [FT817] Re: amplifier Hi Jeffrey, The applicable rules are 97.315 and 97.317 plus a few referred rules. In short, 97.317 says that an EXTERNAL RF HF amp must require NLT 50 W drive to produce its full rated output. You may use such an amp and drive it with the 817, e.g., if you have a Yaesu Quadra, then the output will be 50 W. (Of course the Quadra is $4,000.) In the US, a docking station would be considered an external amp. Not allowed. You may build one amp per year, but not from a kit. If you find an amp to buy, it is OK to buy, own and operate (as long as you comply with the emission rules) regardless of the source. For example, THP can not legally sell its amp in the US or ship it to the US, but it OK for you to buy it and own it. And yes, all of these oddities are the result of the CB problem of the late 70's. Don't look to Yaesu for an expanded top cover or such. The thermal design of the 817 simply would not support the added dissipation. The 817 was designed as a QRP rig (with the capability to interface to an external amp -- see the ACC jack legend on the schematic). I note that these rules apply in the US and not necessarily in other countries. FWIW, I estimate that presently about 40% of the FT-817 are owned by non-US hams. 72 de Barry - W4WB --- In FT817@y..., "Jeffrey Steinberg" <jeffreys@c...> wrote: > I think this is illegal, per FCC. A radio has to load an amp with a minimum > of 50 watts. Its a rule > that came out, if I remember right, in the 1970's so that CB linears would > be harder to come by. > > My friend, K2ACB asked Yaesu about this (apparently there used to be a > similar Yaesu amp a number > of years back) and the guy at Dayton gave the reason above. > > Don't hold your breath in the U.S. > > Dave, not sure where you are, though. > > --jeffrey steinberg, K2MIT > -----Original Message----- > From: Dave B [mailto:dave756pro@h...] > Sent: Wednesday, May 23, 2001 8:13 AM > To: FT817@y... > Subject: [FT817] amplifier > > > Anyone have ideas on a docking station to be released by Yaesu with > amplifier? > > Dave > _________________________________________________________________ > Get your FREE download of MSN Explorer at > > > Yahoo! Groups Sponsor > www. > > > > > > > To unsubscribe from this group, send an email to: > FT817-unsubscribe@... and for a great FAQ ( Frequently Asked > Questions ) see > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > Yahoo! Groups Sponsor www. To unsubscribe from this group, send an email to: FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
to navigate to use esc to dismiss