I believe that it is necessary to do a micoprocessor reset after changing the frequency pads to properly initialize the 817 to its
new configuration?!
Elliott WA6TLA
"Gregory W. Ratcliff" wrote:
toggle quoted message
Show quoted text
I just got back from Dayton and jumpered the first four
jumpers, closed five, and left the others alone. In my
case the radio is not able to TX on any new frequencies.
Is there a chance the software has been updated?
Thanks,
Greg
nz8r
-----Original Message-----
From: vtuff59795@... [mailto:vtuff59795@...]
Sent: Tuesday, May 22, 2001 11:28 AM
To: FT817@...; kg7yc@...
Subject: Re: [FT817] Mods again
Hi,
look at what you said:
Does any one know which of the frequency mod.s works best?
Is it the "solder the first four pins and leave the 5th. open" or
bridge the "first four jumpers".
They both describe the same modification, just different phraseology!
73's
Vic Tuff
G7PYR
To unsubscribe from this group, send an email to:
FT817-unsubscribe@... and for a great FAQ ( Frequently Asked
Questions )
see
Your use of Yahoo! Groups is subject to
To unsubscribe from this group, send an email to:
FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see
Your use of Yahoo! Groups is subject to
