--- In FT817@..., "dog22uk" <j.hilton1@n...> wrote:
HI, have read thru a good few off some off the older threads
regarding opening up the ft817 for wideband tx- ( 5 mhz tx
coverage -
required ) by way off the software mod as opposed to the solder
bridge method, just looking for someone to talk me thru what I
would
have to do to carry out the software mod to a uk supplied ft817
such
as data leads needed ?? standard pc to 817 one as per used in the
commander software ?? and also to confirm as to if there are any
features I would loose with this modification ie.any rx range
loss
or repeater shifts loss, etc ?? only needing the info revelant to
the
offical uk supplied ft817 hence this request. thanks for any help
or
advice on this subject, it is always appreciatted.
regards,
john...
Anyone ?? !! would like just a little re-asurrance before going ahead
with this my first software mod !! by the way, the pc running systmn
this side is windows 98- still okay ?? and wont loose 6 mtrs will
I ?? did I hear someone mention this side effect ?? with this mod to
there own ft817 ??
regards,
john..
