开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: LDG Z817


 

Ignore my jumper comment...it was a signalink senior moment...sri

There is a pinout in the ldg manual...you could ring out the cable.

On Wed, Oct 9, 2024, 6:43?PM Mike Davis via <maddmd818=[email protected]> wrote:
Allan, the cable came with the tuner, at least mine did a month ago. Watch a YouTube video on setup. I press the tune button on the Z817 and the radio switches to packet, the relays rattle and the green light illuminates steady...I hope.

Mike WA1MAD

On Wed, Oct 9, 2024, 3:58 PM Allan Forster via <allanforster1955=[email protected]> wrote:
I have a Z817 tuner, I bought it 2nd hand, it came with the control cable but I do not believe it is the original cable.
My FT-818 will not work with the tuner, it does not change mode and power and so the tune cycle fails.? The Baud rate is set correctly.
The tuner works fine without the cable I.e. manually sending a carrier to tune.
I do not know what is at fault, the cable, the ATU or the FT-818
?
Is there anything special with the original LDG cable?
?
Any thoughts?
?
Thanks
?
Allan G4NNJ

Join [email protected] to automatically receive all group messages.